Delilah and the BBWF2013 Dyno

[mrzigazaga]

Hi Peeps..Well the rolling road did finally turn up late on saturday but couldnt do anything until sunday..So as there was only delilah and a blue griff on there then does that mean i win the rolling road prizes on behalf of the wedges?...I was really pleased with the results and with a bit of tweaking there might be a couple more horses available..


The red lines are last years readings..

The BHP

The TORQUE

The BOOST

FUELLING

They did it in stages but eventually took her up to 6000rpm..My rev counter is out by 450rpm...The torque was still coming and the guy was laughing at how different she is this year..He called her an animal... ...Here is a couple of vids...Im well chuffed as delilah needs a tune and is not running 100% and is having a new blower pulley made to give an extra 2psi as the CR is a bit low..This should also sort the fuelling..Cheers..Ziga
Dyno 1
http://www.youtube.com/watch?v=CclPGfKv12Q
Dyno 2
http://www.youtube.com/watch?v=xOqYfktvkvE
Dyno 3
http://www.youtube.com/watch?v=PUiiM4SXGWE

[V8 Fettler]

That's impressive Mark, is it a joy to drive or a cantankerous thing (which can also be a joy to drive)?

[Convert]

Bloody good news Mark, I reckon you're fuelling her on rusty though...

[Rockettvr]

Nice numbers mark. Probably a few more horses in there once she's properly tuned and set up

[wedgeinald]

Looking and sounding good Mark.

Keep up the good work.

Norman

[mrzigazaga]

Cheers guys..She is a little lumpy on start up and idle but cruising is great..The AAD needs a little fettle to cure that and the over fuelling will be sorted by adding a tad more boost...Also i think i have found another contributor to the over heating issue..In conjunction with the old rad outlet being crimped shut i have noticed some corrosion of the copper inserts that are inside the plastic outlets of the expansion tank..I poked an allen key through and at first it was blocked but have cleared it and it seems to be flowing better..Still waiting for the alloy one that a friend is making for me..But all in all she is a totally different wedge to drive but the same delilah i have known these past three years..I think i love her a little more..Ziga

[wooly350i]

An epic love story for the screen perhaps Mark?

[mrzigazaga]

wooly350i said:

An epic love story for the screen perhaps Mark?

Possibly mate...Im investing in some animation software as filming the conventional way is just too dam expensive..And time consuming...I have been wanting to do it for years as i love cartoons and love to laugh...The software is a lot cheaper than it was 5 years ago..Cheers..Ziga

[wooly350i]

Sounds like you'll get it done then, any idea how James got on with his griff on the rolling road, he came back up from south wales on the Sunday,I liked the twin plenum he had on it, john.

[mrzigazaga]

Not too sure mate..Sorry

[taz turbo]

Mark,

This means one thing....,..

FOR THE SECOND YEAR, V6's PRODUCED THE HIGHEST OUTPUT!!!!!

Maybe good job SEvans didn't put his 200 on, that would really annoy some! And a four pot would take the title!

Chris.

[mrzigazaga]

I would of liked to of seen and heard it..A very nicely modified 200...