wedge 350i rear bearings

[tunepipe911]

Hi

are the bearings for the rear axle hard to find ??
(Ford Granada MKII for the 1986 Wedge)
overhere they where not easy to find,
found two sets so far,,maybe a few more,but that is it,
One set will be used on my car,the other set is spareparts,
if anyone needs one?

Rudy

[Jack Valiant]

Hi Rudy

If you have a spare set with the 2 seals needed for each bearing I will have them off you when you come over on the 7th Sept fella?

Cheers

Chris

[tunepipe911]

Chris

will bring them to the UK the 7th,

Rudy

[adam quantrill]

The bearings are reasonably easy to get - it's the extra seal that's the tricky bit.

[ferlin]

here is a set...
http://www.ebay.co.uk/itm/TVR-TASMIN-REAR-WHEEL-BE...

[tunepipe911]

As the rubber seals are nowhere to be found,I am thinking off working out the section for the seals to dia 75 mm,these rubber seals (75 /50/10)are not rare at all,only problem is to machine the hub holder,once the set-up is ok it is now a matter off minutes,


original seals are 74/50/8 made special for Ford

[adam quantrill]

Wouldn't it be safer to turn the seals down to 74mm?

[tunepipe911]

Adam
That is my first idea,I am just waiting(seals arrive tomorrow,aprox 3 euros a piece) to see how the seals look like and check how thick the rubber is over the metal housing,
Hope I explained it wright,could also post a picture when starting with new seals,

Rudy

[adam quantrill]

Yes I know exactly what you mean. Also I have seen some other remanufactured ones which are the correct size, of which I bought a few, but they only come up occasionally.

[tunepipe911]

This is the" Thing",could work to do,anyone needs a few,will be in the UK 7th sept,not to do business with seals,but if I help out
as they are not easy to find?

[tunepipe911]

75 mm seals in place,back on track by this evening

[hansdaal]

Hallo,

I still have some sets available with 2 CORRECT oil seals at 35 each.
Will try to post a pic.

Hans