Dash vents

[TVRIK]

Hi guys

Does anyone know if the dash vents from a chim (below)
Are the same size as the plastic housings on the roof of a wedge?
Ya know the bits where targa slots in?

[mrzigazaga]

They are 49mm x 10mm internal opening so might do..Have to have a measure up..Shame they don't have 8 instead of 7..I would go halves with you..Ziga

[TVRIK]

mrzigazaga said:

They are 49mm x 10mm internal opening so might do..Have to have a measure up..Shame they don't have 8 instead of 7..I would go halves with you..Ziga

Is that measurement the vents? Or the slots on the roof Zig?

Yeah that is a shame if the do fit, would be a good idea.

Rik

[mrzigazaga]

Vents mate..Funnily enough i was looking at the state of mine earlier…I will measure the lugs on the targa panel tomorrow, There is an engineering firm i keep meaning to pop into…If i get time tomorrow then i will…Cheers…Ziga

[TVRIK]

mrzigazaga said:

Vents mate..Funnily enough i was looking at the state of mine earlier…I will measure the lugs on the targa panel tomorrow, There is an engineering firm i keep meaning to pop into…If i get time tomorrow then i will…Cheers…Ziga

Yeah I'm tucked up in bed, can have a look tomorrow.
Yeah a vaugly remember you posting something a while back.
Hope the fit... The should look great.

Rik

[mrzigazaga]

Hi Mate…had a measure up of the roof lug inserts…Its an approximation but as close as..Looks like the dash vents might work as they are APPROX SIZE OVER ALL 59mm x 20mm / HOLE SIZE IN DASH 49mm x 10mm...Cheers…Ziga

Roof lug inserts.

[pasogrande]

Aren't they the same as the slots for the safety belts (without the slit)?

Wilf.

[mrzigazaga]

pasogrande said:

Aren't they the same as the slots for the safety belts (without the slit)?

Wilf.

I believe so mate…Ziga

[Oz2]

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Cheers
Adam

[123nobster]

I have purchased vents from this seller on ebay and found him very helpful, he actually sent me two different size of vents to see which fitted and looked the best.
If you look on sellers other items he sells other similar items.
I'm sure if someone was to email through ebay he may even have them made up if enough are ordered,his name is Gary .
They look great in my chimaera ( working my way up to a wedge)

Nobby:

[TVRIK]

mrzigazaga said:

Hi Mate…had a measure up of the roof lug inserts…Its an approximation but as close as..Looks like the dash vents might work as they are APPROX SIZE OVER ALL 59mm x 20mm / HOLE SIZE IN DASH 49mm x 10mm...Cheers…Ziga

Roof lug inserts.

Nice one Zig, gonna give ema hoo recon.