Rare / difficult parts ...
Discussion
Hey Chris,
Give these guys a try...they have helped me out a few times with weird stuff on the maserati when everywhere else i tried said no idea!
http://www.autoelectricalpartsuk.co.uk/content/con...
Give these guys a try...they have helped me out a few times with weird stuff on the maserati when everywhere else i tried said no idea!

http://www.autoelectricalpartsuk.co.uk/content/con...
Wedg1e said:
The '4381' bit will be a date code: week 43, 1981. Used on the Princess wedge IIRC and I think some Jaguar.
Thanks Ian useful info... I have tried a few Triumph rare parts sites with no joy but I will look into the Princess route 
I have seen the thread on LED's in the switches but I have found some small high lumen LED's that could be made into a plug in option for the existing unit.
Chris
For those that might not have seen inside this rare beastie...the replacement bulb is not straight forward as it has a straight pin fitting not the usual offset pins. I intend to make a plug in LED pack to go into the case with less heat - less current - one time fit and forget. I will be testing the 2 colour option depending on brightness with a switch for white or green.



Watch this space...
Chris
Watch this space...
Chris
Hi Chris..Well after some in-depth searching i have found it to be from a Jag XJS...I read some forums on it and some have done an optical x 8 LED conversion..Looks like a decent conversion...You can try it on mine if you wish... 
..
May be some bits here that can be used?
http://www.google.co.uk/url?sa=t&rct=j&q=&...
Or even a bulb here?
http://www.google.co.uk/url?sa=i&rct=j&q=&...
Cheers...Ziga

May be some bits here that can be used?
http://www.google.co.uk/url?sa=t&rct=j&q=&...
Or even a bulb here?
http://www.google.co.uk/url?sa=i&rct=j&q=&...
Cheers...Ziga
Edited by mrzigazaga on Thursday 13th February 10:34
Gassing Station | Wedges | Top of Page | What's New | My Stuff



