Wiring connector for rear lights.

[Jonny weggie]

Looking for the wiring connector that slides onto the rear light cluster, if anyone has any spares for beer tokens or know's of a site that i can buy them from would be appreciated.

Thank you Jonny.

[Wedg1e]

You could try Shaun, the 1fingerbandit, he's dismantled a few wedges so may have a wiring loom lying around he could chop for you...

Otherwise any Renault of that era probably used the same connector, I think my 25GTX had them...

[Jonny weggie]

Thanks for the info Ian will check it out.

[adam quantrill]

Hi Jonny they didn't use the Fuego "slide" on the wedges - they soldered on the connector to the rear plastic bit with a mini loom a few inches long.

So you have two choices - reuse your old rear bit or unsolder the loom and solder it onto the new one.

[Wedg1e]

adam quantrill said:

Hi Jonny they didn't use the Fuego "slide" on the wedges - they soldered on the connector to the rear plastic bit with a mini loom a few inches long.

It's been a while since I was in that particular dark recess of my car, I'll have a look, you could be right...

[Jonny weggie]

Hi Lads, managed to find a connector [there like hens teeth] at Douglas Valley,
would off showed you a photo but would not upload for some reason.
It is the one that slides on, i was just cleaning them up for a better contact when they broke so now have spares.
Thanks again
Jonny.

[GV]

Sus out the feeds and wire directly to the bulb connections...

[Jonny weggie]

GV said:

Sus out the feeds and wire directly to the bulb connections...

That was my last option if i couldnt find a connector, thanks GV.