Clutch master cylinder
Discussion
Hi all,
Can anyone suggest what the clutch master cylinder is off or is a TVR "special "
I was about to go for a cruise to bed in the brakes and was welcomed by a lifeless pedal and clutch fluid all over the carpet.
Also does anyone know where to get one ?
One forward and two back............
Regards
Braveheart
Can anyone suggest what the clutch master cylinder is off or is a TVR "special "
I was about to go for a cruise to bed in the brakes and was welcomed by a lifeless pedal and clutch fluid all over the carpet.
Also does anyone know where to get one ?
One forward and two back............
Regards
Braveheart
Reading between the lines you either have a 350i or a 450SE....
In which case do as I did and convert to the Land Rover Series 3 master (you can use the LR slave too). Mine cost £12.50 delivered. It looks identical.
With the master either buy an adapter for a few quid and use the original pipe, or change the pipe union to match, you can take off the old end and only lose a few mm. You will have to use your old pushrod from the pedal but it only takes a few mins to change over.
In which case do as I did and convert to the Land Rover Series 3 master (you can use the LR slave too). Mine cost £12.50 delivered. It looks identical.
With the master either buy an adapter for a few quid and use the original pipe, or change the pipe union to match, you can take off the old end and only lose a few mm. You will have to use your old pushrod from the pedal but it only takes a few mins to change over.
Ebay link to seal kit - now £10 and list of cars that the cylinder is used below:
http://www.ebay.co.uk/itm/Clutch-Brake-Master-Cyli...
http://www.ebay.co.uk/itm/Clutch-Brake-Master-Cyli...
Gassing Station | Wedges | Top of Page | What's New | My Stuff