door and boot rubbers

[barrington]

another request any recommendations for door and boot rubbers

[mrzigazaga]

Hi Dave...Seals direct seem to have most of what is needed...Even the quadrant bumper rubber..I bought the boot seal from them and its exactly like the original...
https://www.google.co.uk/url?sa=t&rct=j&q=...
Cant find the part number but you can match what you have up to theirs..And request a sample if you are unsure..They are very helpful over the phone as well..There is also Woolies but have never used them...Cheers...Ziga

[RCK974X]

woolies do a big range of stuff, not cheap, but good quality...

www.woolies-trim.co.uk

[440Interceptor]

wow, great ranges. Its amazing that this stuff is still available.

It would be useful to get together a list of the various part numbers I think.

[phillpot]

Couple more options.............


Priority Plant

Pheonix Trim

[mrzigazaga]

Just went through my invoices and found:

SEAL'S DIRECT
Boot seal part number = ETS619
Front & Rear bumper seal = SRS1890

Edited by mrzigazaga on Sunday 3rd January 12:32

[440Interceptor]

Zig, are the bumper seals the U shaped prfile that goes between the bumper and body? SRS1890 looks like a solid triangle.

[mrzigazaga]

Hi mate...This bumper seal sits on the top of the front and rear bumper where it meets the body..More so for the 350i..The seal may be okay for the 280i front bumper..(Not rear) but If you are asking about the front bumper rubber for US cars then I'm not sure where to get that...Sorry...Ziga

[tvrmk363]

Ziga,
Reading about the rubber seal on the bumpers, Seals Direct doesn't show dimensions for the pieces. what are the dimensions on the two flat sides?

(side note: Are the calendars out yet?)

Our source for rubber over here for the most part is Bill Rachel at Dominion Spares. If he doesn't stock he will usually supply a source he may know of.

There is also a company here in the states called Steele's that has just about everything.

Charlie
Ohio

[mrzigazaga]

Hi Charlie..Not entirely sure as to the measurements but it was exactly the same as what was there originally...Should be what is on yours already..I can have a measure tomorrow or speak to them...

Calendars...I have some desktop calendars left...

Cheers...Ziga

[440Interceptor]

mrzigazaga said:

Hi mate...This bumper seal sits on the top of the front and rear bumper where it meets the body..More so for the 350i..The seal may be okay for the 280i front bumper..(Not rear) but If you are asking about the front bumper rubber for US cars then I'm not sure where to get that...Sorry...Ziga

Zig, mine has a u shaped rubber profile covering the front and rear bumpers enabling both to be bolted up to the body. UK car originally, not US, cheers.

[mrzigazaga]

440Interceptor said:

mrzigazaga said:

Hi mate...This bumper seal sits on the top of the front and rear bumper where it meets the body..More so for the 350i..The seal may be okay for the 280i front bumper..(Not rear) but If you are asking about the front bumper rubber for US cars then I'm not sure where to get that...Sorry...Ziga

Zig, mine has a u shaped rubber profile covering the front and rear bumpers enabling both to be bolted up to the body. UK car originally, not US, cheers.

....Sorry mate...Just realised what i said....Right....Flat side that sits on the bumper is 12mm and the back edge that butts up against the bodywork is around 6mm...Cheers...Ziga