Clutch cylinder

[olihofmann]

Hello

Does anybody know what size the clutch cylinder , the one at the pedal, shoud be?
Thanks for any infos


Oli

[mrzigazaga]

Hi Oli.

There are two...One is from a Land Rover and the other is from a TR6 LHD...The first one needs a thread adapter as the threads are different but the TR6 type does not.

Here is a part number for the first one.
STC500100
GMC1015
Or....Bearmach BR3018..I believe all these will need the adapter which can be bought from Rimmers for a few pounds...Ill see if i can find it for you...Unless anyone else knows off the top of their barnet...


Cheers


Ziga

Edited by mrzigazaga on Wednesday 31st August 11:15

[Wedg1e]

The original is a Girling 0.70" bore with casting number 64676310. The seal kit is an SP2102.
Rumour has it that it was taken from the TR6 and/or Lotus Cortina.

[RCK974X]

If it was from TR5, TR6, chances are it's also same on 2000/2500 saloon, which might be cheaper ? Just a thought.