VIBRATION:S

[superwedge]

any help would be good for this one, 89 350i, new wheel bearings and ujs,up to 70 its ok but from 70 onwards a bad vibration come across the hole back end,then I have to slow as its that bad,check prop to day and the back uj on prop has some play in it,would this do this ,and also the best way to take prop off?

[KKson]

Slop in a UJ could be the culprit. I had a similar vibration some time back and it was down to the tyres. How old are they?

[TVRleigh_BBWR]

Could just be wheel balance.

[adam quantrill]

Was it like this before the bearing and UJ replacement?

[TVRleigh_BBWR]

I changed a wheel bearing and did put a new nut on to correct torque, but the washer was very old and overly crushed by prev. owner, so had no spring left in the steel, so the nut came a little loose and destroyed the bearing within 10 miles.
I had to re-do and swapped the washer, after this it was ok.