what model do they fit

[77racing]

I am going to sell these wheels I have, Can anyone tell me what models they would be good to fit please.

oz wheels 16 009 by flat chat, on Flickr

[pk500]

77racing said:

I am going to sell these wheels I have, Can anyone tell me what models they would be good to fit please.

oz wheels 16 009 by flat chat, on Flickr

Message me sizes and price please

[ElvisWedgeman]

They are for the wedge 400SE and 450 SE as I have a set on my car. They can be different sizes, width and diameter etc. In refurbished condition with good tyres they would be worth around a ton each in my opinion. I'm not sure of the condition of yours and it looks like it would need a set of road tyres as the ones on it look like track tyres. I too would be interested if the wheels are 15 inch as I need a spare set so please send me a pm once you've decided on a price. To be honest, if I were you I would auction them to make it fair on everyone including yourself. Good luck.

Tony. TCB.

Edited by ElvisWedgeman on Saturday 11th February 16:08

[gmw9666]

ElvisWedgeman said:

They are for the wedge 400SE and 450 SE as I have a set on my car. They can be different sizes, width and diameter etc. In refurbished condition with good tyres they would be worth around a ton each in my opinion. I'm not sure of the condition of yours and it looks like it would need a set of road tyres as the ones on it look like track tyres. I too would be interested if the wheels are 15 inch as I need a spare set so please send me a pm once you've decided on a price. To be honest, if I were you I would auction them to make it fair on everyone including yourself. Good luck.

Tony. TCB.

Edited by ElvisWedgeman on Saturday 11th February 16:08

They are Tuscan Challenge Alloys, 16" x 9" if my memory services me right

Sounds like a price war is about to start lol......Perry YHM fella

[Campbell]

They definitely look like the Tuscan wheels 16×9s.
They can rub on the SE but not on the SEAC's
I too would be interested of the price was right...

[adam quantrill]

They will only fit on the 400SX.

[Number 7]

Tuscan 16 x 9 wheels with 20mm offset will fit a 400 / 450 BUT clearances can be tight, particularly at the rear. The wheel rims will be quite close to the A frame end, but using wheel spacers to increase that clearance will potentially mean the tyre is outside of the arch, and will rub under compressions. Using SH style rear tie bars will also help with tyre clearance, as they are offset compared to the standard tie bars. Also need to be careful with tyre sizing, especially at the front, again, for arch clearance issues.

[mk1fan]

Would like them very muchly.

Perry, as an aside, do you know Dave from RND? I'll email you.

[Number 7]

mk1fan said:

Would like them very muchly.

Perry, as an aside, do you know Dave from RND? I'll email you.

You definitely wouldn't get them on a 350 Stewart, unless you add some big arches.

[77racing]

Thanx fella's ,they are from a Tuscan Challenge car I owned a few years ago now. Will have a think about what to do for the best shortly.

Stewart you have mail regards RND

[wedged up]

Sent you an email .

[adam quantrill]

If you have one spare I'll be interested - I currently have 16 x 9's on the rear (also ex-racer) and a spare would be useful just in case of a ding.

[mk1fan]

Number 7 said:

mk1fan said:

Would like them very muchly.

Perry, as an aside, do you know Dave from RND? I'll email you.

You definitely wouldn't get them on a 350 Stewart, unless you add some big arches.

Quattro style

Thanks Perry, will check the mail later.

[mrzigazaga]

77racing said:

Hi mate

Don't wish to be facetious but the wheel in the middle looks smaller than the one to the left??...Might just be the camera angle...


Regards


Ziga

[TvR Driver]

I have 16x9 on mine from a Tuscan race car and didn't like the spacers as they didn't leave enough thread to feel safe whilst throwing the car around and the chaps at hexam found and put in new longer studs and they now don't rub and sit nicely - give Richard a call as sure he could help anyone that needs it

Edited by TvR Driver on Thursday 16th February 10:27

[Number 7]

TvR Driver said:

I have 16x9 on mine from a Tuscan race car and didn't like the spacers as they didn't leave enough thread to feel safe whilst throwing the car around and the chaps at hexam found and put in new longer studs and they now don't rub and sit nicely - give Richard a call as sure he could help anyone that needs it

Edited by TvR Driver on Thursday 16th February 10:27

That's a great colour - unusual as well. What's it called?