1983 TVR Tasmin 280i - 2+2 on Ebay
1983 TVR Tasmin 280i - 2+2 on Ebay
Author
Discussion

pantani201

Original Poster:

386 posts

285 months

Friday 6th May 2005
quotequote all

tweety

829 posts

287 months

Monday 9th May 2005
quotequote all
Not on Ebay anymore cos it's parked on my drive! Great car, good condition only 60k miles and it's a 2+2 all for only £1600. Just sat through 2 hours of hardly moving on the M25, cos of some major pile-up this morning, and the temperature only crept above 90 a few times. Wish the Griff was as dependable. Anyway I've not had a wedge for 8 years and never had a 280 or a fixed head so expect lots of questions. For instance, wots the huge great red central heating tap type thing that looks like it should be in the house. I feel a bible purchase coming on.

Al.

grahamw48

9,944 posts

266 months

Tuesday 10th May 2005
quotequote all
Where is this 'tap' ?

Mine hasn't got one.

Sounds like a fuel or battery cut-off, like on racers.

tweety

829 posts

287 months

Tuesday 10th May 2005
quotequote all
No it's on the cooling system, next to the plenum, will have a proper look tomorrow and give a better description if no-one has any ideas. Also it's a round stop-cock type tap.

Al.

grahamw48

9,944 posts

266 months

Tuesday 10th May 2005
quotequote all
Oh dear.
Someone appears to have fitted it with a Moggy thou engine.

gemini

11,352 posts

292 months

Tuesday 10th May 2005
quotequote all
aghhh - memories

welcome to a rare breed

york33

995 posts

290 months

Tuesday 10th May 2005
quotequote all
Well done, you've purchased one of the finest types of Wedge ever built

pantani201

Original Poster:

386 posts

285 months

Tuesday 10th May 2005
quotequote all
Glad to hear its gone to a good home. Would have gone for it myself except she who must be obeyed would have had my guts for garters.

>> Edited by pantani201 on Tuesday 10th May 10:00

mikeb

2,869 posts

310 months

Tuesday 10th May 2005
quotequote all
Tweety, have you got a few holes drilled in the bonnet near the screen covered by some plastic plugs???.

MikeB

mikeb

2,869 posts

310 months

Tuesday 10th May 2005
quotequote all
Tweety, have you got a few holes drilled in the bonnet near the screen covered by some plastic plugs???.

MikeB

tweety

829 posts

287 months

Tuesday 10th May 2005
quotequote all
No not any holes drilled in bonnet, just normal 2+2 vents. Have put a pic of the engine showing the red stp-cock tap thingy on my photo hosting site. If you go to my profile and follow the link it will show it.

Al.

gemini

11,352 posts

292 months

Tuesday 10th May 2005
quotequote all



Somehow I dont think that should be there

19560

14,332 posts

286 months

Tuesday 10th May 2005
quotequote all
tweety said:
For instance, wots the huge great red central heating tap type thing that looks like it should be in the house.

It is a central heating cut off valve. Someone appears to have inseted it to cut off the heater, probably because it was leaking. Time to delve into the dashboard, good luck.

niva441

2,129 posts

259 months

Tuesday 10th May 2005
quotequote all
Impressive bit of plumbing!

My +2 certainly hasn't got anything like that.

Is it possibly to cut off the heater for draining?

mikeb

2,869 posts

310 months

Tuesday 10th May 2005
quotequote all
Just checked the plate and it ain't the 2+2 i used to own. Same colour, year and everything.

MikeB

averhamdave

6 posts

259 months

Tuesday 10th May 2005
quotequote all
Al, The heater "on/off" control on the console doesn't work, it's either "on" all the time or "off" all the time. An earlier owner fitted the valve under the bonnet to enable the heater to be switched off in the summer and back on in the winter. Dave

Gerry Attrick

614 posts

277 months

Wednesday 11th May 2005
quotequote all
I think it's similar to the set up on my 350. Interior temperature control is through mixing cold / warm air inside the car via flap of some sort. Warm water is always passing through the heater matix. This means the car heats up even more in the summer (Are we having one this year???). A previous owner has fitted an isolation valve under the bonnet so I can stop the warm water circulating in the summer.

tweety

829 posts

287 months

Wednesday 11th May 2005
quotequote all
Thought it might be something like that, thanks guys. Dave YHM, sorry I've just asked you before I read your post. Mike, I'm surprised there are two so similar considering the small amount made.

Cheers, Al.