Rear wheel bearings supplier?
Discussion
Hi Toby
As said above its a Ford Granada mk2 rear wheel bearing but with two seals per side not one....
https://www.googleadservices.com/pagead/aclk?sa=L&...
(As above)
I have used Jumblemaster and never had an issue, they will post overseas.
Hope this helps
Ziga
As said above its a Ford Granada mk2 rear wheel bearing but with two seals per side not one....
https://www.googleadservices.com/pagead/aclk?sa=L&...
(As above)
I have used Jumblemaster and never had an issue, they will post overseas.
Hope this helps
Ziga
Fingers crossed, but the photo in his advert shows the same seals as in the Granada kit, and only one side will fit the wedge.
You can of course carefully extract the old seals, pick the best one, and as a temporary measure fit to the outer which is the easiest one to replace if you can get a new one later.
I find that the seals with the spring seal better than the hard rubber ones. It's more pot luck what you get there though.
You can of course carefully extract the old seals, pick the best one, and as a temporary measure fit to the outer which is the easiest one to replace if you can get a new one later.
I find that the seals with the spring seal better than the hard rubber ones. It's more pot luck what you get there though.
Hi Toby
I was wrong as regards to the seal..you were right Adam, I found this post that Wedg1e wrote...(In great depth as always.. )
https://www.google.co.uk/url?sa=t&rct=j&q=...
It was a while back so my apologies....Im sure you can buy two of the same seals.. 2 x inner IIRC.
Ziga
I was wrong as regards to the seal..you were right Adam, I found this post that Wedg1e wrote...(In great depth as always..
)https://www.google.co.uk/url?sa=t&rct=j&q=...
It was a while back so my apologies....Im sure you can buy two of the same seals.. 2 x inner IIRC.
Ziga
Looks like I have one on the way out will need doing shortly.
So I looked through my stash of parts and seems I have two styles, one like the above (with the plastic bits in) in a purple box with "KIT 053". This one comes with the standard Ford two different oil seals.
The others are older style with open gaps at the ends.
Tony, are your ones pre-packed with grease?
So I looked through my stash of parts and seems I have two styles, one like the above (with the plastic bits in) in a purple box with "KIT 053". This one comes with the standard Ford two different oil seals.
The others are older style with open gaps at the ends.
Tony, are your ones pre-packed with grease?
Gassing Station | Wedges | Top of Page | What's New | My Stuff