Reae tyre wear
Reae tyre wear
Author
Discussion

pwd95

Original Poster:

8,452 posts

267 months

Friday 12th August 2005
quotequote all
Noticed this on my rear n/s tyre. It seems to have a bevel edge on it?!? I've put some chalk on the edge and gone for a 20 mile run and the chalk stayed. Then later on in the day I went for a shorter run and the chalk was scrubbed off. Anyone had this?
[pic]http://photos.fotango.com/p/eba00474149f00000008.jpg[/pic]
When the car is stationary the edge is at 45 degrees to the ground. :scratchchin:

Gandalf

2,381 posts

267 months

Friday 12th August 2005
quotequote all
pwd95 said:
Noticed this on my rear n/s tyre. It seems to have a bevel edge on it?!? I've put some chalk on the edge and gone for a 20 mile run and the chalk stayed. Then later on in the day I went for a shorter run and the chalk was scrubbed off. Anyone had this?

When the car is stationary the edge is at 45 degrees to the ground.


Must be a set of special "Wedge" shaped tyres Wyn




"There was something about chalk & cheese"


jmorgan

36,010 posts

313 months

Friday 12th August 2005
quotequote all
Can't say I have noticed. They don't last long enough

Number 7

4,113 posts

291 months

Friday 12th August 2005
quotequote all
Catching on the arch under compression? Caused by sagging springs, worn UJ's?

7.

wedg1e

27,034 posts

294 months

Friday 12th August 2005
quotequote all
Number 7 said:
Catching on the arch under compression? Caused by sagging springs, worn UJ's?

7.


Fat bloke?

gsx600

2,740 posts

277 months

Friday 12th August 2005
quotequote all
My rears do that a bit, but I think it was the overloading at LeMans with them hitting the arches.

adam quantrill

11,679 posts

271 months

Friday 12th August 2005
quotequote all
They all do that, Sir!

Check the inside of the wheel arches for rubbing. Either that or you drive on two wheels..... (actually I'd like to see that at next BBWF - you listening, Gun Metal ;^)

pwd95

Original Poster:

8,452 posts

267 months

Friday 12th August 2005
quotequote all
Yep I put some chalk on the inside of the arch where I could see some scuffs and went for a blast. Sure enough it rubbed off. Thanks guys