Back on 4 wheels again.
Discussion
Ok, so there is quite a bit left to go
Nose
Windscreen
Damper
Radiator
Fan
Mount oil cooler
Transponder
fix bonnet
front spoiler
front spots
etc etc
but at least she now has 4 wheels again and an un broken chassis (bits front of the xmember replaced)
[pic]http://www.blackcatracing.net/images/tasmin/taz4w.jpg[/pic]
Nose
Windscreen
Damper
Radiator
Fan
Mount oil cooler
Transponder
fix bonnet
front spoiler
front spots
etc etc
but at least she now has 4 wheels again and an un broken chassis (bits front of the xmember replaced)
[pic]http://www.blackcatracing.net/images/tasmin/taz4w.jpg[/pic]
Put it this way your working for me and richard for the rest of the year 
you should have turned right
rather than
at least thats the
Chassis
Steering Rack
Wishbones
rose joints all sorted in one hit.
the damper went off to nitron yesterday.
and you'd better start practising your spray painting
>> Edited by Graham on Tuesday 11th October 11:12
you should have turned right rather than
at least thats the
Chassis
Steering Rack
Wishbones
rose joints all sorted in one hit.
the damper went off to nitron yesterday.
and you'd better start practising your spray painting
>> Edited by Graham on Tuesday 11th October 11:12
[quote=chassis 33]It will be good practice for when I spray the proper race car...
That'll be the one crashed even before it got to the race track
Actually whilst in the care of its first owner topless taz was crashed twice whilst a road car !!!! I've got the repair bills from TVR to prove it
That'll be the one crashed even before it got to the race track
Actually whilst in the care of its first owner topless taz was crashed twice whilst a road car !!!! I've got the repair bills from TVR to prove it
smiley out! getting there slowley
New nose On, Bolted rather than bonded its still temp at the moment whilst we work out the longterm fitting, but it will still be bolted so it can easily be removed for engine and suspension work.
New Rad bolted in place, actually a Granada cossy Item for now. It was going to be Tempory, but it does seem to fit nicley, just need to see if i can get the fan mounted to it.
We've also replaced both the anit-roll bar drop liks as they were both broken with SHpub items, probably turned out cheaper than trying to fabricate new ones...
The Spoiler and the headlamp covers are being made on monday so its
spolier
bumper
headlamp covers,
oil pipes
fix exhaust ( popped apart at a join)
fit transponder ( broken casing an no mounting holes)
water pipes
windscreen.... ( thats number 6 in 5 years)
bonnet pins
a little grp work
full nut and bolt check
wheel alignment
fan and wiring
spot lights and wiring
front brake lines
Test Saturday
Race Sunday
New nose On, Bolted rather than bonded its still temp at the moment whilst we work out the longterm fitting, but it will still be bolted so it can easily be removed for engine and suspension work.
New Rad bolted in place, actually a Granada cossy Item for now. It was going to be Tempory, but it does seem to fit nicley, just need to see if i can get the fan mounted to it.
We've also replaced both the anit-roll bar drop liks as they were both broken
with SHpub items, probably turned out cheaper than trying to fabricate new ones... The Spoiler and the headlamp covers are being made on monday so its
spolier
bumper
headlamp covers,
oil pipes
fix exhaust ( popped apart at a join)
fit transponder ( broken casing an no mounting holes)
water pipes
windscreen.... ( thats number 6 in 5 years
) bonnet pins
a little grp work
full nut and bolt check
wheel alignment
fan and wiring
spot lights and wiring
front brake lines
Test Saturday
Race Sunday
Gassing Station | Wedges | Top of Page | What's New | My Stuff