Split rim tyre fitting
Split rim tyre fitting
Author
Discussion

pwd95

Original Poster:

8,452 posts

267 months

Sunday 27th November 2005
quotequote all
Can most or all tyre fitters do these wheels or does it require a special tyre fitting thingy. My local tyre fitter (chap I know well) can get me a pair of 245's for good money but he hasn't done split rims before.

gsx600

2,740 posts

277 months

Sunday 27th November 2005
quotequote all
I wouldn't have thought a split rim would make any difference, as when the tyre fitter gets the wheel it should be in one piece and look like any other wheel
The only problem you might get is fitting 245 on a narrow rim (8 inches) might be a tight fit, unless you also have the Tuscan racer wheers that were a bit wider ?

Hoping to put 245 x 16 on my rears when I next need tyres

dickymint

29,060 posts

287 months

Sunday 27th November 2005
quotequote all
Only issue I know of is make sure they fit the balance weights in the right place ie. on the inside of the wheel. Most modern balancing machines tell them where to fit the weights in their software.
Wyn - check out paul Jarrold tyres in Monmouth 4 X Toyo Proxes for £338 fitted including VAT. Which i think is cheap.

pwd95

Original Poster:

8,452 posts

267 months

Sunday 27th November 2005
quotequote all
The ones he can get are BF Goodrich £65 each. Anyone tried these?

jmorgan

36,010 posts

313 months

Sunday 27th November 2005
quotequote all
Celtic do mine on the same machine as the others and they are still round when they finish with them

rev-erend

21,619 posts

313 months

Sunday 27th November 2005
quotequote all
Although it's a split rim : there is no need to split the rim to
fit the tyres.

The come off the same way as all other tyres - just ask him to take special care as they are your pride & joy.

My brother once spent about an hour taking apart a race wheel that weighted about a nats cock and was thinner that Kate Moss.. it was an ex F1 wheel(s) that some guy with some race car was using for circuit racing.. The rearon for splitting it was it was too delicate to lever the tyre off..

That was year's ago - so they probably don't do that now..

pwd95

Original Poster:

8,452 posts

267 months

Sunday 27th November 2005
quotequote all
Thanks guys

cptsideways

13,881 posts

281 months

Sunday 27th November 2005
quotequote all
Splitties usually have the wheel recess on the outer side so you need to mount the wheel on the tyre machine upside down. Otherwise the you cant get the tyre on or off. Ask if they know which way up is best! Rim recess upwards

pwd95

Original Poster:

8,452 posts

267 months

Sunday 27th November 2005
quotequote all
Will do

kevinday

13,828 posts

309 months

Monday 28th November 2005
quotequote all
Grandmother, eggs, suck, teach... but don't forget to make sure that the tyres do not foul the arches or suspension. 245 may not fit. I had a 350 with body kit and wide wheels tyres. Had to go narrower on the tyres because of fouling. So many years ago means I cannot remember the sizes, sorry.

>> Edited by kevinday on Monday 28th November 09:22