No fuel pressure...
No fuel pressure...
Author
Discussion

anonymous-user

Original Poster:

83 months

Sunday 12th February 2006
quotequote all
Just changed the fuel hose from the swirl pot to the fuel pump, whilst I was about it I changed the filter. I now can’t get fuel pressure up to the engine. I have gone back to the filter (checked it s the right way round) and tried to suck fuel through but it is a vacuum?

Is it all supposed to self prime? I am wondering whether I have disturbed a dying fuel pump?

Anyone help with any tests or have I missed something?

(If I have a naff pump does anyone know the part number)

Cheers

Doug

blaineuk

2,615 posts

276 months

Sunday 12th February 2006
quotequote all
if you turn the ignition on and move the flap in the air box does the pump run.

wedg1e

27,035 posts

294 months

Sunday 12th February 2006
quotequote all
If the pump's not running you may have a broken earth or feed to the pump.

anonymous-user

Original Poster:

83 months

Sunday 12th February 2006
quotequote all
I rember that sametime back if you move the Flap the pump engages... I will try that then check the earth. Cheers.

I do get the feeling I disturbed something.

leorest

2,346 posts

268 months

Sunday 12th February 2006
quotequote all
sidewinder said:
...vacuum...
A bit unlikely I know but, it hasn't somehow got connected the wrong way round has it? Either electrically or plumbing?

GreenV8S

31,017 posts

313 months

Sunday 12th February 2006
quotequote all
Power the pump direct from the battery and see if you get pressure then. (How are you measuring pressure at the engine?)

anonymous-user

Original Poster:

83 months

Sunday 12th February 2006
quotequote all
When I operate the flapper the solenoid clicks but the pumps not working, so I need to check the wiring. Also I will run it from a separate 12v supply to see if the pumps ok or not.

If I take the hose off from the "out" of the fuel filter no fuel comes out, if I then get a clear piece of pipe and suck from the filter I can’t draw any fuel through? If the pumps siezed I would still assume some fuel would come through?

I must have disturbed the pump, somewhere along the line, as I took it off to remove it form the old pipe easier.

Although I said I can’t get pressure, I haven’t measured it, I just checked for fuel at the engine by taking pipes off, there is some there but the spark plugs are bone dry.

blaineuk

2,615 posts

276 months

Sunday 12th February 2006
quotequote all
had my filter off for a couple of weeks and no petrol came through the pump in that time, so must be the design, more like you have a bad connection

GreenV8S

31,017 posts

313 months

Sunday 12th February 2006
quotequote all
If there's no noise from the pump then you almost certainly have an electrical problem.

wedg1e

27,035 posts

294 months

Sunday 12th February 2006
quotequote all
sidewinder said:

If I take the hose off from the "out" of the fuel filter no fuel comes out, if I then get a clear piece of pipe and suck from the filter I can’t draw any fuel through? If the pumps siezed I would still assume some fuel would come through?



IIRC the fuel pump has a non-return valve on the outlet that keeps the rail pressurised. You probably can't suck hard enough to overcome the spring that's keeping the valve closed...

anonymous-user

Original Poster:

83 months

Monday 13th February 2006
quotequote all
Thanks for the replies. Have 12V supply at the pump. Now realise why the solenoid was so loud when moving the flap... when I connected an external 12v supply to the pump it’s seized just a dull thud... anyway pump knackered off to get a new one.

Cheers

Doug