door removal

[blaineuk]

just about to remove doors on the wedge, i know there are 4 bolts (2 at each end ??), but do i need to remove the window runners and motor to allow the door to slide of the bars.

blaine

[jeff m]

The TVR manual suplied with US 280s says remove window and window channels, unclip door lock thingys, remove door release mech. Remove door alignment plates,replacing one bolt back into hole to prevent door dropping. Unplug electrics, undo the two bolts, pull door off along telescopic door beam.

Word of warning, or disclaimer on my part, this manual denies the existance of window motors! ( and brakes) it's incomplete, but for what it covers it's good.

[firefox1712]

Hmm - Wedge with no doors -

V8 - glass fibre body - wide tyres - loud exhaust note. Sounding like a rorty beach buggy!

Just think - blonde in passenger seat, wide open beach, just like Steve McQueen. How old is Faye Dunaway now?

>> Edited by firefox1712 on Tuesday 2nd May 08:09

[leorest]

I knew someone who used a carwash to remove the door on his company car Me, take the micky?....

Not sure if the same technique will work for you as the original method was developed on a Pug.