My new challenge is not a wedge

[cantus]

Just bought it and very pleased with it.
It needs a lot of work incl. the fitting of a modern alloy chevy V8.
And yes, I keep the SEAC.

[rev-erend]

cantus said:

Just bought it and very pleased with it. It needs a lot of work incl. the fitting of a modern alloy chevy V8. And yes, I keep the SEAC.

? An outdoor Jacuzzi ?

[silverback mike]

Crikey, and I thought I liked a challenge..

[firefox1712]

I've got a three wheel invalid buggy I use from time to time - I'll swap it for that if you like!

[pistolar]

Looks like an S with a bit of old tubing

[gsx600]

You paid for that ?

I've got some old rope if you're interested

Might need it to tow down the tip

[dickymint]

gsx600 said:

You paid for that ? I've got some old rope if you're interested Might need it to tow down the tip

Rollerskates and a couple of Beano albums would be easier

[rev-erend]

Halford's have got less filler..

[grahamw48]

It's a good thing we're all friends.

[gsx600]

grahamw48 said:

It's a good thing we're all friends.

And jealous

[combine]

Canctus , any chance of you doing a tech talk at the wedge fest , eg sorting a rough wedge ! Might need a time limit on that one.

[gun metal]

combine said:

Canctus , any chance of you doing a tech talk at the wedge fest , eg sorting a rough wedge ! Might need a time limit on that one.

He will do that. but he needs a lot of beer. When he drinks a lot of heineken cantus wanna talk about everythink, including sex drugs and rock and roll.

[combine]

Ok fine !

[cantus]

Huh ??????

[bhardy]

At least this one doesn't have a 3k paintjob done by the Stevie Wonder himself.....

Ps. The 400 was back from Erwin's and didn't run to good at lower revs, but at higher revs what the **** it's become a beast!! It's back at Erwin for some fine tuning to make it run better at lower revs, and i think we found some lost horses.

>> Edited by bhardy on Monday 15th May 10:06

[stoeprand]

bhardy said:

At least this one doesn't have a 3k paintjob done by the Stevie Wonder himself..... Ps. The 400 was back from Erwin's and didn't run to good at lower revs, but at higher revs what the **** it's become a beast!! It's back at Erwin for some fine tuning to make it run better at lower revs, and i think we found some lost horses. >> Edited by bhardy on Monday 15th May 10:06

Well, I think I have to add something to that to be make it all perfectly clear!!
Even a 400 needs some petrol eventually.....

Anyway, in about 20 minutes we'll see what we can do about taming the horses a little and get more of an old man's TVR instead of the current hot and wild Boy-Racer 400 SE SCREAMER. (What a pity)

[gun metal]

bhardy said:

At least this one doesn't have a 3k paintjob done by the Stevie Wonder himself..... Ps. The 400 was back from Erwin's and didn't run to good at lower revs, but at higher revs what the **** it's become a beast!! It's back at Erwin for some fine tuning to make it run better at lower revs, and i think we found some lost horses. >> Edited by bhardy on Monday 15th May 10:06

I hope you find a few donkey's. You only find horses in a SEAC.

>> Edited by gun metal on Monday 15th May 20:34

[bhardy]

gun metal said:

[quote=bhardy] I hope you find a few donkey's. You only find horses in a SEAC. >> Edited by gun metal on Monday 15th May 20:34

I think both are wedges seem to miss some horses. My cam is probably worn too

[gun metal]

bhardy said:

gun metal said: [quote=bhardy] I hope you find a few donkey's. You only find horses in a SEAC. >> Edited by gun metal on Monday 15th May 20:34 I think both are wedges seem to miss some horses. My cam is probably worn too

Dat is kut.

[cantus]

My cam is probably worn too [/quote]

Wie zegt dat ???????