Discussion
how did the wedge aerials vary throughout their production? most I've seen seem to have an automatic chrome one. Mine has one like these SE ACs:
www.pistonheads.com/gassing/topic.asp?t=281476&f=12&h=0
www.pistonheads.com/gassing/topic.asp?t=281476&f=12&h=0
My 1982 drophead had an automatic aerial connected to a JVC radio cassette unit. I believe this was the orginal; fitting. Sadly the aerial died on me (broken platic "cable"
and I had to replace it with a cheapo manual unit. The original was a Ford one- and it must have worked ok for 23 years.I would like to source another one, but I haven't looked very hard!Beaulieu Autojumble will be the best bet.
and I had to replace it with a cheapo manual unit. The original was a Ford one- and it must have worked ok for 23 years.I would like to source another one, but I haven't looked very hard!Beaulieu Autojumble will be the best bet.grahamw48 said:
My leccy aerial motor makes a nice buzzing noise, to presumably lift the non-existent (broken off) aerial,and then after a little 'beep' in protest, off goes the radio.
Far too complicated for me. Whatever happened to bent coathangers ?
Far too complicated for me. Whatever happened to bent coathangers ?

disconnect the blue wire from the ariel/radio
Gassing Station | Wedges | Top of Page | What's New | My Stuff




).