Good evenings work - she's ready..
Good evenings work - she's ready..
Author
Discussion

rev-erend

Original Poster:

21,619 posts

313 months

Thursday 13th July 2006
quotequote all
At the weekend - I realised that my front anti roll bar bracket was broken / missing on one side - ordered one from TVRparts on Monday.

It arrived today - fitted it this evening ..

No real problems or difficulty fitting it .. but whilst doing it noticed two things.. roll bar was almost resting on steering arm

Which could well explain the dodgy steering feel I've had under some circumstances recently (since before Le Mans).. when it just got an MOT (was it like that for MOT )

And then I spotted a chaffed wire by the power steering pulley - turned out this was a wire from the dizzy / amplifier thingy..
although it had not gone all the way thru - it might explain some of the rough running and bad CO readings I've been having recently..

Oh - did I mention I've polished her and cleaned the wheels..

Happy days

Hopefully it should handle a bit better now

badredwedge

3,450 posts

257 months

Thursday 13th July 2006
quotequote all
Nice one Rev
See Ya Saturday

tallbloke

10,376 posts

312 months

Thursday 13th July 2006
quotequote all
If you had the car jacked up with the suspension fully unloaded, that would explain the rack/rollbar closeness, nore clearance sat on the road...

rev-erend

Original Poster:

21,619 posts

313 months

Friday 14th July 2006
quotequote all
tallbloke said:
If you had the car jacked up with the suspension fully unloaded, that would explain the rack/rollbar closeness, nore clearance sat on the road...


That would be true except with the rollbar mount missing the rollbar hangs lower by about 2 inches..

Just went for a drive this morning and the steering is perfect..

I'm more than happy.

£5 - well spent

tallbloke

10,376 posts

312 months

Friday 14th July 2006
quotequote all
Result!

TVR-NUT

1,404 posts

283 months

Friday 14th July 2006
quotequote all
That's great news rev - see you tomorrow.

dixiebabes

3,111 posts

253 months

Friday 14th July 2006
quotequote all
rev-erend said:
At the weekend - I realised that my front anti roll bar bracket was broken / missing on one side - ordered one from TVRparts on Monday.

It arrived today - fitted it this evening ..

No real problems or difficulty fitting it .. but whilst doing it noticed two things.. roll bar was almost resting on steering arm

Which could well explain the dodgy steering feel I've had under some circumstances recently (since before Le Mans).. when it just got an MOT (was it like that for MOT )

And then I spotted a chaffed wire by the power steering pulley - turned out this was a wire from the dizzy / amplifier thingy..
although it had not gone all the way thru - it might explain some of the rough running and bad CO readings I've been having recently..

Oh - did I mention I've polished her and cleaned the wheels..

Happy days

Hopefully it should handle a bit better now


Same happened to mine a couple of weeks ago i had to use a spanish windless to pull it back up so i could fit the bracket it had dropped that far when i jacked it up

wedg1e

27,035 posts

294 months

Friday 14th July 2006
quotequote all
11PM and I'm still working on mine... finally got the bumper and rear light on, stopped things leaking and put odd bits of trim back on... a quick squirt with the hose and that will have to do. Then I need to sort out some clobber, tart meself up and hit the sack.
Must remember to fill up in the AM...