urgent help needed

[stainless_steve]

I've not enough power going to my coil,any ideas where the wires come from,does it go through a relay.
wanting to go to BNG today

HELP



Steve

[rev-erend]

Steve,

I've not got a wiring diagram in front of me..

But - 2 types of coil in this world.

12v & 6 V.

With the ignition on - check voltage (both sides - as I don't know the input side) with the - of the meter of the - of the battery.

If you have 12 or 6 then that's not the problem.

if you have 12 or 6 then it could be an earth is missing somewhere.
Check all earth leads.

The ignition key controls the coil - and the feed should be the fuse board.

My diagram says - fuse 14 (25a) middle row of 3 - far right.

Hope it helps.

[stainless_steve]

cheers Alan its 12 v but its only showing 7

Edited by stainless_steve on Friday 1st September 18:19

[dickymint]

Fit a wire direct from battery positive to coil. Hope it gets you there Matey.

edited to say - failing that then indeed it should be an earth as Rev says.

Edited by dickymint on Friday 1st September 18:05

[stainless_steve]

temp bodge,been down to halfrauds bought a switch and run a wire to the battery/ coil.
setting off now

[rev-erend]

I was going to suggest the same as dicky.. ditto the earth to battery if you need it too..

[dickymint]

stainless_steve said:

temp bodge,been down to halfrauds bought a switch and run a wire to the battery/ coil.
setting off now

I only accept beer tokens enjoy BNG steve, Jen and kids

[stainless_steve]

dickymint said:

I only accept beer tokens enjoy BNG steve, Jen and kids

buy you a or two Dicky next time we meet,we had a great time thanks


Steve