Solved? wing mirrors for your wedge?
Solved? wing mirrors for your wedge?
Author
Discussion

thomas7037

Original Poster:

82 posts

239 months

Wednesday 15th November 2006
quotequote all
After trying to find the origonal ones I have now given up. Early wedge wing mirrors seem to be a real problem. Solutions:

1. Buy an after market boy racer-esc wing mirror, these were two expencive for what they were in my opinion.

2. Buy classics wing mirrors, these IMHO are too chrome for a tvr but with the chrome door handles could work.

3. Find a modern car with somthing that might do? and are electric.

I have done 3. and over the last weeks have been sorting out which cars have door mounted mirrors (a surprising amount) here is a list for any one who wishes to look into the possibility. I have got some Audi 80 mirrors as they are electric like the TVR ones and heated? Plus they look the most wedgy! May need to make some angled plates to attach to the car though?

Mini (new): too round
Mini (old): too small?
Audi 80: IMHO the best if the mount angle is right!
Deawoo Matiz: Could work well little round
Honda Jazz: again could work
Mazda MX-5: Mount on top of door as appose to the side? and seem to be rather expensive?
Fiat Barchetta: hard to come by
Any more please add

350zwelgje

1,820 posts

290 months

Wednesday 15th November 2006
quotequote all
Weren't there citroen CX door mirrors mounted on TVR S? Perhaps a way forwards, and even TVR OEM stuff....

Rob

badred

3,450 posts

257 months

Thursday 16th November 2006
quotequote all
350zwelgje said:
Weren't there citroen CX door mirrors mounted on TVR S? Perhaps a way forwards, and even TVR OEM stuff....

Rob


Yes, S and Griff mirrors are from a citroen but are complex and I would think difficult to adapt for a Wedge, I have seen an early FHC with mirrors from a late 80s Jag XJ?, I think, they looked good, plenty in the breakers yard too

Edited by badred on Thursday 16th November 13:27

leorest

2,346 posts

268 months

Thursday 16th November 2006
quotequote all
The mirror glass on the original minis is pretty much the same profile as used in my series 2 leccy pods.

thomas7037

Original Poster:

82 posts

239 months

Thursday 16th November 2006
quotequote all
The most anoying part to all of this is that the mirrors must have been sourced from somewhere? there must be somebody in there 60's or 70's who was at tvr and sourced the parts? I might try ringing tvr directly but fear this has probably been done before?

wedg1e

27,038 posts

294 months

Thursday 16th November 2006
quotequote all
On my Tasmin I fitted some Halfords specials: they were intended to be screwed to the door, in the same way as the original Tasmin mirrors did.
I adapted mine to mount on the triangular fillets at the front of the doors, Glen The Paint colour-matched them to the car and they worked quite well. A bit small but certainly no worse than the factory-fitted ones on my 390SE.

broadside

856 posts

311 months

Friday 17th November 2006
quotequote all
I needed some many years ago on my old 280 FHC. Got them from Demon Tweeks. They were called "California" mirrors. Fitted dead easy and looked right for the car too. Don't know if they still do them or not.

Nige'

thomas7037

Original Poster:

82 posts

239 months

Sunday 19th November 2006
quotequote all
I had a look at the fitting of the audi mirrors and its a no go. 1 the mount angle is wrong and 2 it would require cutting a bit out of the door. I was thinking about designing a mount braket and assking a local engineering firm to make two up? could also help others in my position? but would you want aluminum or steel braketts on your car?

my search continues, the deamon tweaks ones sound good but just look a bit cheap and not electric?