sd1 rear lights
sd1 rear lights
Author
Discussion

bin looney

Original Poster:

97 posts

242 months

Tuesday 23rd January 2007
quotequote all
do sd1 rear lights fit where the capri ones are?

chassis 33

6,194 posts

311 months

Tuesday 23rd January 2007
quotequote all
No, IIRC the SD1 units are quite a bit bigger, having said that anything will fit given enough time, effort and money in varying proportions!

Regards
Iain

350zwelgje

1,820 posts

290 months

Tuesday 23rd January 2007
quotequote all
You have a set of SD1 rear lights? I have a whole SD1 attached to the rear lights.... Must get it on the road just for the fun of it.

And the back of the wedge is fiberglass, so you can make it fit as mentioned earlier.

Rob


Edited by 350zwelgje on Tuesday 23 January 19:52

chassis 33

6,194 posts

311 months

Tuesday 23rd January 2007
quotequote all
350zwelgje said:
You have a set of SD1 rear lights? I have a holed SD1 attached to the rear lights....


Sounds about right I'm picking up another SD1 shortly, been locked in a garage for 10years, so is relatively rot free bounce

Regards
Iain

350zwelgje

1,820 posts

290 months

Tuesday 23rd January 2007
quotequote all
Hyjack alert....
My SD1 is living outside for 5 years now, as garage was about to crumble to pieces on to it. Throw in a battery and petrol, and it starts (based on experience, like about every one-two years). Sadly it is only 2300S, was originally bought (ok like costing nothing) to put a V8 in, seems that this car is in good nick, and '81 in between series, that I like to keep it like that. Especially when it is cheaper to pick up a SD1 3500 for less than what a conversion would cost..... Back to wedges now.

Shouldn't we be on the Rover forum by the way? Oh, we are as well.

End of hyjack.

Rob

James MK

556 posts

280 months

Tuesday 23rd January 2007
quotequote all
Some of the later 280i models had SD1 rear lights, along with big rubber strips in the bumpers for the US market. Is it one of these models we're talking about?