Headlight crank arm

[richo_i]

Did I see on here late part of last year someone was producing new headlight crank arms ? I have done a search but cant find the thread and may need one as my off side light has a mind of it's own and it seems either to be the crank arm or the spline it goes on to that is at fault.

[shpub]

I have been looking at it but other work has taken priority at the moment. Email me if you need one and I'll see what I can do.

[rev-erend]

Surely that is just part of the TR 7 'wiper' motor assembly - maybe it's available from Rimmer brothers.

www.rimmerbros.co.uk/rimmer/tr7/electrical#Headlamp%20Lift%20System

[richo_i]

No unfortunatly not although similar, I have two tr7 complete motor and light sets here but the arm is different. We have now found the problem to be two fold both the spline from the motor and the flat bar that goes on to it are rounded but we will remove the spline from one of my tr7 motors and put it in to the tvr one as the motor on MOH looks a lot better than the tr7's and will cut of the rounded hole from the tvr crank arm and weld on the good one from the other.