pod goes half way up -help?
Discussion
Check the crank arm on the side of the lift motor, the shaped hole can become worn and this allows the drive shaft to spin without lifting the pod all the way up. If this is what is happening, the crank arm shaped hole can be re-aligned with the aid of a vice and a hammer! gently does it though.
I'd go with the worn (or loose) crank arm... or the nylon gear in the unit has stripped. The way the electrics are configured, a mechanical issue that jammed the pod would leave power on to the motor until either the battery went flat or the motor caught fire. Or both
So nothing serious then...
So nothing serious then...
Edited by wedg1e on Sunday 18th February 22:03
Gassing Station | Wedges | Top of Page | What's New | My Stuff




