SEAC help needed

[rev-erend]

Hi Guys,

Need your help with some information.

I need to know the lenght and height of the SEAC Decals on the boot lid and on the side of the car.

Also need to know the height of the pin stripes on the doors - think it will be either 3mm or 6mm.

Thanks

[dickymint]

Hi Rev.,

Boot and side decals are 375mm x 29 mm. Stripes are a combination of 3mm and 1mm (ish) Hope this helps.

[Nacnud]

Neil's treasure trove (aka TVR Car Parts) has some genuine Wedge factory stickers.
I can't remember whether there were SEAC stickers in the bundle, but there were lots of models.

Neil/Richard made my SEAC stickers for my rebuild a few years ago; might be worth asking if that can lay their hands on the publisher/typesetting files....

FYI - If you want to tart up yer front, Neil also has some factory fresh SEAC front bumper perspex with the 'proper' black lines on them. Very tempting....

[hormone]

Or you could get em from Racegraphics ( advertise on ebay).
He produces various TVR decals & has the font & sizes. About £4.50 for 400SE sized decal.

[rev-erend]

hormone said:

Or you could get em from Racegraphics ( advertise on ebay).
He produces various TVR decals & has the font & sizes. About £4.50 for 400SE sized decal.

Yes thanks- I think he is on PH .. VIPER - I think..

[adam quantrill]

Is this for the Volvo 340 GL - are you going to "Barry" it?

[rev-erend]

adam quantrill said:

Is this for the Volvo 340 GL - are you going to "Barry" it?

Don't have a 340GL anymore .. traded up to a TVR T350 and then changed that for a Clio 182.

No - I removed my decials to respray the car..

It's not a nice shade of mustard yellow (primer)..