Anyone got a throttle pot?
Anyone got a throttle pot?
Author
Discussion

pwd95

Original Poster:

8,457 posts

267 months

Thursday 17th May 2007
quotequote all
for a flapper they can exchange for some beer tokens?

BadRedWedge

3,450 posts

257 months

Thursday 17th May 2007
quotequote all
do you want a BIG one ??

pwd95

Original Poster:

8,457 posts

267 months

Thursday 17th May 2007
quotequote all
confused Erm scratchchin dunno

l33

3,469 posts

253 months

Thursday 17th May 2007
quotequote all
scratchchin

pwd95

Original Poster:

8,457 posts

267 months

Thursday 17th May 2007
quotequote all
There's only one size Shirly

danny hoffman

1,617 posts

291 months

Thursday 17th May 2007
quotequote all
The original ones are about 2 inches diameter, but only the smaller ones (about 1 inch diameter) are available new. There is an adaptor to convert to the later type, very expensive from the usual Rover specialists, but under £20 from Jag suppliers.

pwd95

Original Poster:

8,457 posts

267 months

Friday 18th May 2007
quotequote all
Here it is

danny hoffman

1,617 posts

291 months

Friday 18th May 2007
quotequote all
That's the smaller later type

pwd95

Original Poster:

8,457 posts

267 months

Friday 18th May 2007
quotequote all
Alrightythen thumbup Anyone got one lying around doing nothing??

Oh another question....I've got a pipe on the back of the plenum letting in un-metered air scratchchin what's the pros & cons of this then?



richybaby

172 posts

255 months

Saturday 19th May 2007
quotequote all
Hi Wyn,
That's the engine overrun valve, pipe normally connects from there to a take off on the plenum by the throtlle vien, won't make any difference that it's not connected, except that the air it bleeds into the engine on overrun is not filtered. If the vavle is faulty you would either get high idle problems or increased/excessive engine braking, that's as I understand it anyway, I'm sure there are others here who know more and will correct me if I am wrong. Cheers.

BadRedWedge

3,450 posts

257 months

Saturday 19th May 2007
quotequote all
pwd95 said:




Wyn so where does the pipe run that is shown just in front of the return spring (the not rusty one) ?? It looks like the pipe that should be on the over-run valve.

Not my engine Not my photo but you can just see where it goes



Is the over-run valve working ?? or is the housing there for show ?? With a wild modded slightly tweaked wobbleengine like yours all sorts of mods may have been made

pwd95

Original Poster:

8,457 posts

267 months

Saturday 19th May 2007
quotequote all
Thanks boys, I'll see if I can either connect it up or give it some sort of a filter of its own.

Any throttle pots out there?

Rich hows it going? Have you blown the cobwebs out of the old 450 this year yet?

gsx600

2,740 posts

277 months

Saturday 19th May 2007
quotequote all
pwd95 said:
Here it is



Are you not missing the pipe for the dissy advance as well ?

pwd95

Original Poster:

8,457 posts

267 months

Saturday 19th May 2007
quotequote all
yes

richybaby

172 posts

255 months

Saturday 19th May 2007
quotequote all
pwd95 said:
Thanks boys, I'll see if I can either connect it up or give it some sort of a filter of its own.

Any throttle pots out there?

Rich hows it going? Have you blown the cobwebs out of the old 450 this year yet?


Hi Wyn, yes dusted her off, checked everything over, all ok, been for a quick blast here and there, been out this afternoon for a quick blast, saw a break in the clouds, sun came out and I was off like a shot. All seems to be running in fine form. what's the latest on your car, hope it's nothing too serious and you get it sorted soon.

pwd95

Original Poster:

8,457 posts

267 months

Saturday 19th May 2007
quotequote all
Aye just the throttle pot knackered, don't like partial throttle, goes like a ba***adr if you floor it, as ever. Are you going to BBWF this year? Be nice to see and hear the black beauty in the convoy, even if it's just a 'day out' job driving

Bit of news, my mate ended up buying Simon's 400 from Porthcawl, thread here;
www.pistonheads.com/gassing/topic.asp?h=0&t=382652

Might have bin better off with yours from a collectors point of view mind scratchchin

We'll have to have a South Wales "Chicken Run" sometime soon, there's still plenty of us.
What's the weather like tommorow?

Richybaby

172 posts

255 months

Tuesday 22nd May 2007
quotequote all
pwd95 said:
Aye just the throttle pot knackered, don't like partial throttle, goes like a ba***adr if you floor it, as ever. Are you going to BBWF this year? Be nice to see and hear the black beauty in the convoy, even if it's just a 'day out' job driving

Bit of news, my mate ended up buying Simon's 400 from Porthcawl, thread here;
www.pistonheads.com/gassing/topic.asp?h=0&t=382652

Might have bin better off with yours from a collectors point of view mind scratchchin

We'll have to have a South Wales "Chicken Run" sometime soon, there's still plenty of us.
What's the weather like tommorow?



No, sadly not going to BBWF, I would seriously love to go though, but it's just not feasible at the moment, I considered trying to pull it off briefly a few weeks ago, but the brownie pointage alone I would have to accumilate doesn't bear thinking about, besides other things, if it was closer I would defo consider a fleeting visit, but a bit far for that me thinks. Hope you all have a great and trouble free time, must try to make it next year.

I thought that might have been your mate buying that 400SE from Porthcawl, looks like a realy nice car, is he having fun yet!!

I'd defo be up of a south wales run sometime, given a bit of notice. Glad the cars sorted.