Discussion
TVRleigh said:
Hi Nigel do you have a link or let me know when it's on.
As my be interested if I can get the TVR sorted.
Looks like I may just fit a new Rad, as they are about £130 + vat and shipping.
Leigh,As my be interested if I can get the TVR sorted.
Looks like I may just fit a new Rad, as they are about £130 + vat and shipping.
any contact details for the place you can get a rad for £130 as I may need a new one soon.
Also planning to be at the ELMS weekend and the 24Hour race the weekend before, marshalling. As I am coming down from Scotland and am camping both weekends no TVR
.KJR
well my 400SE has a Landrover Range rover LR820 3.5 V8 manual 1970 - 1986 Radiator in it.
Also found the OEM part number NRC4448 its the air con version. and OEM 575971 for the no air-con.
http://www.paddockspares.com/pp/RANGE_ROVER_to_198...
http://www.paddockspares.com/scp/RANGE_ROVER_to_19...
Also OEM RRO 11 / 575971 this is no air-con.
http://www.gmradiator.co.uk/?page=search&stype...
I just doubled check and mine had a 4448 sicker on it.
Steve heath say they may have been moded but all the sizes look correct, but they may not have the cowling screw holes or the otter hole in them.
For the price I will get one and see, if not well send back or sell on ebay.
Also found the OEM part number NRC4448 its the air con version. and OEM 575971 for the no air-con.
http://www.paddockspares.com/pp/RANGE_ROVER_to_198...
http://www.paddockspares.com/scp/RANGE_ROVER_to_19...
Also OEM RRO 11 / 575971 this is no air-con.
http://www.gmradiator.co.uk/?page=search&stype...
I just doubled check and mine had a 4448 sicker on it.
Steve heath say they may have been moded but all the sizes look correct, but they may not have the cowling screw holes or the otter hole in them.
For the price I will get one and see, if not well send back or sell on ebay.
Hi Leigh - watch out for the orientation of the inlet and outlet pipes fella.. I got hold of one for my old 400SE and found out the size etc was all ok but the pipes were the wrong way round so had the old one refurbished and no probs after that
I think it was £135 12 month ago.
Chris (we met on the way to BBWF)
I think it was £135 12 month ago.Chris (we met on the way to BBWF)
Well on all the pic's they look right. and the same as I have.
Spoke to a local re-core place, and he quoted me 140+ for a new rad and 180 for a re-core,
He said the price of copper and cores have gone though the roof plus the cost of labour.
he said he should be able to mod a new one If I have a problem.
But going to leven tonight to look at the Ali ones to see if they would fit.
Yes I remember you in your red 350.
At least I know why I had heating problems.
Spoke to a local re-core place, and he quoted me 140+ for a new rad and 180 for a re-core,
He said the price of copper and cores have gone though the roof plus the cost of labour.
he said he should be able to mod a new one If I have a problem.
But going to leven tonight to look at the Ali ones to see if they would fit.
Yes I remember you in your red 350.
At least I know why I had heating problems.
Gassing Station | Wedges | Top of Page | What's New | My Stuff


