sx info required

[chedder]

Any regulars on here own or have owned a 350sx????
Looking for the following info;
1) What compression ratio the engine used and how this was achieved; pistons, heads or spacer gaskets?
2) What rpm is the S102 running and what size pulleys
3) What belt ? ridged or toothed? and if poss the belt number.
4) Do they utilise a seperate bypass valve for low revs and what type of relief valve for over pressure?

TIA...Chedder

[ed_crouch]

You bought that Sprintex off ebay then?

Ed.

[chedder]

ed_crouch said:

You bought that Sprintex off ebay then?

Ed.

Moi???? da'cour hehehe, concluded the sale this morning.

and so the headaches begin

Edited by chedder on Sunday 2nd September 17:07

[L33]

Adam Quantrill has a 400sx if that helps.
I'm sure he'll be along shortly...

[Number 7]

And Jasper owns one: http://www.pistonheads.com/gassing/profile.asp?mem...

7.

[chedder]

Thanks chaps, have found out that no bypass is required as it's a built in feature on the throttle body so thats one less headache

[TVRleigh]

Keep us updated on the progesss.

With pic's

[adam quantrill]

I started a post a while back - SX technical data. I have put some stuff on that, it would be good to have it as the master copy of any more discovered information. If you can't find it I'll bump it.

Dennis Priddle (ex DPR) would be a good source of info and maybe some parts too.