Seat Help

[Poledriver]

Hi Guys
I don'tknow if anyone has this info to hand I can't get home to measure mine and need to get an order in today! Here goes:-
For a 350i 1987 I need the maximum width available for the seats across the bottom (the seat not mine!) And also the dimensions of the fixing centres to the floor.

Thanks in anticipation!!

[gsx600]

Seem to remeber it was very narrow for the actual seat, and only one I found that fitted were something like Cobrouo Clubman. (about 50 cm from memory)

As for the hole fitting , you can always drill through the floor and reinforce with metal straps or large washers for the seat fixings

BTW in the end I went for some later Chimera seats and found these to be very comfy and cost lest than a set of new recaro's cobrau etc, also were in a leather that matched the rest of the cars interior

[Poledriver]

gsx600 said:

Seem to remeber it was very narrow for the actual seat, and only one I found that fitted were something like Cobrouo Clubman. (about 50 cm from memory)

As for the hole fitting , you can always drill through the floor and reinforce with metal straps or large washers for the seat fixings

BTW in the end I went for some later Chimera seats and found these to be very comfy and cost lest than a set of new recaro's cobrau etc, also were in a leather that matched the rest of the cars interior

Thanks I've got the same seat in mine (I think) but they are not high back and I do like something for my head to bounce on if anything happens at speed!

Edited by Poledriver on Monday 17th March 15:52

[pwd95]

If I had a Wedge I'd measure them for you right now.

[Poledriver]

pwd95 said:

If I had a Wedge I'd measure them for you right now.

Are you missing her already?

[pwd95]

Must be...I'm having some strange dreams...

http://www.pistonheads.com/xforums/topic.asp?h=0&a...

[GV]

I've bolted my Chimp seats without a runner straight to the floor - they are lower down than my old wedge type and feel more comfy too.