1988 Wedge Windscreen
Discussion
Could be a few things creating the problem, the 'extra air device' mounted just below the front of the plenum on the drivers side may have stuck open, the cold start injector on the plenum may also have stuck open.
Failing that it may be that the thermo sender on the inlet manifold has packed up.
If you have a Haynes V8 manual or better still one of Steve Heath's finest Wedge bible's then you can follow the guides to check out the above suggestions.
Hope that helps
Chedder
Failing that it may be that the thermo sender on the inlet manifold has packed up.
If you have a Haynes V8 manual or better still one of Steve Heath's finest Wedge bible's then you can follow the guides to check out the above suggestions.
Hope that helps
Chedder
Edited by chedder on Friday 10th October 13:52
Gassing Station | Wedges | Top of Page | What's New | My Stuff


