Wedge Rear Swing Arms

[wedgeinald]

Hi hope someone might be able to tell me if (possibly only for future reference) if I can still get a kit of bushes (with or without bolts) for the rear swing arms on my 280i Wedge.

I'm in the process of having the rear diff replaced and had planned a "complete rear end" refirb at the same time, I ordered a kit of A-Frame bushes from Steve Heath (not realising my mistake at the time i.e. my car has swing arms not A-frames.) but he is sorting that mistake out for me, he is a very helpful chap indeed.

I don't think my swing arms need any work really (as I said it was a "while were doing it" type idea) but I'd like to see if I can still source the bushes for the swing arms just in case i need to do them in the future.

I believe the bolts are a TVR special and might be a pain to source (I'm hoping I won't need them anyway as mine would seem to be ok from initial inspection) any info would be most useful.

Norman

[convert]

You might try Richard Thorpe at RT racing in Sheffield.

[tempus]

Yes,still available,RT racing,Polyflex,old lotus specialists (Europa).HTH.Tempus

[TVRleigh_BBWR]

If you let me know the bolt size's I'll be able to source them for you.
May also be able to get them in stainless, but will be a lot more expensive.

will need to know bolt length, thread size (washer if req) and Nut type nylock or std.

[wedgeinald]

Richard Thorpe was very helpful and was able to sell me an entire kit including bolts/pins etc.

A very happy wedge should be back on the road mext month I hope.

Thanks for your help guys.

Norman

[mac123yre]

try steve heath, top service