suspension all on

[gsx600]

Well now got 4 wheels on my wedge

Some bits were a bit of a bu&&er but eventually all rear is now on !

Drove her round the block and could hear cluncking

Looks like the front antiroll bar mounting come off again. Tried fitting a new bracket , but just would not hold to the chassis. Have to try again tomorrow afternoon as mot Tuesday

Might have round the rear platforms a bit high as now looks like a 4WD Wedge

[AM400]

Have a similar problem, was thinking of trying the universal roll bar brackets from superflex. I believe someone has fitted these before to a wedge so might be worth a try.

[gsx600]

No time to get anything like that, going to resort to my old method of a small exhaust type clamp with metal strip around the bush, or cut the older mounting and attach with clamp

Worked well last time, and not sure why I changed back to originals !

[Wedg1e]

Funnily enough, I was rummaging in my garage for a camera (that I knew I had somewhere) yesterday when I happened upon a box. It contains a full set of front suspension bushes, ARB bushes and balljoints for the 390! The receipt tells me I bought them in August 2007. I'd totally forgotten and was already watching some on Ebay!
Just need a full set of rear bushes now and it'll be time for mayhem...

[gsx600]

Hi ya Ian

Certainly liven up the ride again on new poly bushes at the rear Along with new bearings and uj's, just not the easiest job in the world

[leorest]

Best of luck with the MOT tomorrow.
If you get desperate you could just remove the bar completely.

[grahamw48]

Beat me to it.

Like the spare tyre...if it aint there it can't be faulted.