What do you doing to your Wedge this weekend ?

[rev-erend]

Driving it ?

Fix-in it ?

Polishing it..

Improving it ?

[shpub]

Machining the bearings for the fully adjustable rear anti-roll bar...

[sevans]

If Speedy cables haven't messed up, then fitting the new temp/oil pressure and boost gauges and getting the dash back in. Weather and work permitting.

[rev-erend]

Me - fixing headhight (dodgy connection)
and polishing wheels .. boring but very satisfying
results.

[andymadmak]

dreaming of getting it back with it's rebuilt engine and gearbox.
Only a few weeks more to go!

Andy 400se

[kjr]

Trying to get the radiator out, with the help of my dad, having strained/pulled a muscle in my chest trying to get the big hoses off .

[dmsims]

Targa Roof trim
Polish with 3M Finesse It
HT leads
and start on Por15 on the chassis

[Podie]

Spending it

[rev-erend]

kjr - mmmm, rad out - hard job.. rad in.. even harder !

Do you have an oil cooler fitted to the rad .. if so consider how you will reattach the bolts to the rad (I think you might have to remove the number plate !).

[cirks]

giving the car its first official outing since the new engine etc at Snetterton. So, if anyone is in the area and wants to either say 'hi' or blag a ride then feel free.

[kjr]

rev-erend,

I did this job about a year ago so am well aware of how difficult this is .

The oil cooler is attached to the radiator and so the two come out as one. This time I am going to take the front bib spoiler off to allow more room to get the radiator in/out.

KJR

>> Edited by kjr on Friday 14th November 17:30

[york33]

fixing it, maybe, nasty wiring still

[streaky]

rev-erend said:

Me - fixing headhight (dodgy connection) and polishing wheels .. boring but very satisfying results.

Ditto and associated electrics (in between doing the kitchen to keep SWMBO happy) - Streaky

[stainless_steve]

Guess i better clean mine
going to Rockingham race track on Wednesday for a photo shoot for classic car mag, think its with a lamboghini

[terence]

Thinking about outrigger replacement and rear brake overhaul whilst at the Exeter kit car show. May even find some useful bits there.

[blaineuk]

driving it if the weather picks up, hopefully also going to see father teds new arrival. other wise carry on painting chassie

[NHyde]

Stainless , which mag , and when does it hit the streets ?

[stainless_steve]

NHyde said:

Stainless , which mag , and when does it hit the streets ?

It's called Classic Car mag,i hope it will be in next months issue,but will try to find out more on Wednesday and let you all know .
Getting quite excited about it

Steve

[NHyde]

Nice one !!

We're not worthy !!

[stainless_steve]

Think it will be a four page spread ,and will take all day for pics and info,with some laps of the track