Tasmin Decals

[Charlie280]

Does anyone know where I can get a new set of Tasmin decals made? I took mine off as I will be getting a respray done shortly (any do's/don'ts on this??)and didn't think about replacements until the originals were a sticky mess on the floor.

[Adrian@]

Tasmin full decal (full lenght of car an inch or so tall and the words Tasmin) or just the words Tasmin...OR the main bonnet TVR logo....I have the full lenght in Black and logo in Brown and I think Gold.
Adrian@

[Wedge_Perfect]

I ordered some from Viper on here at [e-mail].

Have a click on TVR Logos on his website www.racegraphics.net

[rev-erend]

Wedge_Perfect said:

I ordered some from Viper on here at [e-mail].

Have a click on TVR Logos on his website www.racegraphics.net

I used Viper too .. good service, not expensive at all.

[Viper]

thanks guys for the plug, i have the TASMIN decal on file at 37mm high

[adam quantrill]

When I stuck the SX in for a back end respray I made sure I took detailed photos of all the decals first, with a measuring tape in place for scale, but I suppose it's too late for that now......

[Charlie280]

sorry all, been away from the pc for a few days. Thanks for all the info I'll be following up with Viper. What I'm really after is a full set of side stripes with lettering, rear boot lettering and front 'TVR' decal but I like them in white (preferrably) or the original black (at a push). After the spray job it'll be going to Custom chrome racing in Nuneaton for a full 2" exhaust system. I've used them before on other cars and they are highly recommended.

[Wedg1e]

When I had my Tasmin resprayed in '99 the decals came from some place near Nottingham. Although I'd traced the decals on the car they already had the templates and produced absolutely perfect logos including the double stripe, in a metallic gunmetal. My sprayer then matched the sill colour to the decals, looked excellent.

Then two weeks later some cackhead keyed the roof