Lawfield Engineering

[carob]

Talking to Brian and the guys at the BBWF about my new 10mm HT Leads and the gave me some usefull information.

Not only that, but they have supplied me with a MSD Coil and Mallory Ignition Amplifier off Peter Wheelers 5000M.

Thanks for the information and parts guys, much appreciated.

Rob

[chedder]

Hi Rob, glad you got sorted, is it running better now? Off back to the factory tomorrow morning to see the latest progress on the White Elephant, will have a look in at Lawfield Engineering and see if the offer of a ride in the Green Monster is still available!!!!!

Chedder

[carob]

Hi Tony

Getting it fitted on Monday.

Problem was trying to find somewhere to fit it under the bonnet, bit cramped under there.

It was not really running bad, it runs ok with the old king lead, but the coil and particually the Amp will allow me to run it with the 10mm king lead as it will give it the extra power that it needs.

Top guys down there.

Rob

Did you get the DVDS copied mate?

[Transmitter Man]

Rob,

What brand 10mm leads, Magecors or whatever they're called?

What's the job of the ignition amplifier?

I understand what MSD controllers can do.

One and the same?

Have you got adjustable rev limiter?

My old girl is in with my local TVR centre for new Radtec ali rad and max cfm Spal fan + new otter switch.

Wood is in with ex-Rolls factory vaneer man.

Looking to have my car back in the next couple of weeks.

Phil
420 SEAC

[carob]

Hi Phil

The leads are Formula Power, 10mm Quad Core.

www.formulapower.com

The Amp will give a greater spark that the leads require in my case.

The package of Coil and Amp is what Lawfield where running on the 5000M.

Nice to see you cracking with the SEAC, Loved it at the BBWF.

Rob

[chedder]

Hi Rob, have got the DVD's now, had to someone else to do them as my laptop had a wobbler when I tried to burn them, will try and get them in the post next week.
Have started a new job and was up your neck of the woods recently (Chester Le Street) and have to say.....quality Totty wandering around! Must be something in the water

Chedder

[carob]

chedder said:

Hi Rob, have got the DVD's now, had to someone else to do them as my laptop had a wobbler when I tried to burn them, will try and get them in the post next week.
Have started a new job and was up your neck of the woods recently (Chester Le Street) and have to say.....quality Totty wandering around! Must be something in the water

Chedder

Great news on the graft Tony.

If your up here again giz a buzz mate. Meet up.

Would of liked a nip over the factory tomorrow myself. Post some piccys of the White Elephant if possible.

Going to have a run down Harewood on Sunday.

Looking forward to seeing the Wedge footage.

Rob

[grahamw48]

Hi Rob.

Looks like the weather will be better on Sunday.
I was originally planning to go Saturday, but may now go Sunday instead...or maybe both, as not far from me.

Drag racing at York this weekend as well...and Croft I think.

It's like blinkin buses isn't it.

I have the same leads as you, but normal sized king lead.

[carob]

grahamw48 said:

Hi Rob.

Looks like the weather will be better on Sunday.
I was originally planning to go Saturday, but may now go Sunday instead...or maybe both, as not far from me.

Drag racing at York this weekend as well...and Croft I think.

It's like blinkin buses isn't it.

I have the same leads as you, but normal sized king lead.

I, seen them at BBWF Graham. picked them up from one of your many threads mate.

York Raceway Sunday you say?

Could be up for a bit of a change of plan, you know taking part intead of watching!!!!

Decisions decisions

Rob

[carob]

grahamw48 said:

Hi Rob.

Looks like the weather will be better on Sunday.
I was originally planning to go Saturday, but may now go Sunday instead...or maybe both, as not far from me.

Drag racing at York this weekend as well...and Croft I think.

It's like blinkin buses isn't it.

I have the same leads as you, but normal sized king lead.

Bring that Chip with me either way mate.

Rob

[grahamw48]

Ok Rob.

Bloody stupid weather.

eta. Let me know if you go to the drags. I might do Harewood in the morning and Raceway in the afternoon to lend you some support, and shoot a little vid.

I'll PM you my mobile.

Edited by grahamw48 on Friday 31st July 23:32

[carob]

grahamw48 said:

Ok Rob.

Bloody stupid weather.

eta. Let me know if you go to the drags. I might do Harewood in the morning and Raceway in the afternoon to lend you some support, and shoot a little vid.

I'll PM you my mobile.

Edited by grahamw48 on Friday 31st July 23:32

I will give you a buzz the morra marra.

Either way up for a blast Sunday!!!

Rob

[gsx600]

carob said:

Talking to Brian and the guys at the BBWF about my new 10mm HT Leads and the gave me some usefull information.

Not only that, but they have supplied me with a MSD Coil and Mallory Ignition Amplifier off Peter Wheelers 5000M.

Thanks for the information and parts guys, much appreciated.

Rob

Why do you need these for your 10mm leads ?

I've been running 10 mm leads for the last couple of years on the 450 on standard lucus dissy and coil with no probs

[carob]

They seem to work ok on the larger engine like yours.

Mine is only a lil old 350.

Rob

[gsx600]

Arrr I see, thought you had a 400 for some reason

[grahamw48]

...but with supercharger.

[gsx600]

Think I spoke to soon, it seems like my ignition amplifier has died on me , as I now have no sparks at all, either that or the coil is dead