At last!!!
At last!!!
Author
Discussion

pwd95

Original Poster:

8,459 posts

268 months

Saturday 12th December 2009
quotequote all
A decent weekend to take a few snaps. Bloody rained almost every day since I bought it. banghead
Click to enlarge...

















Edited by pwd95 on Saturday 12th December 14:57

snookes

262 posts

313 months

Saturday 12th December 2009
quotequote all
wynn

looks superb! how's it compare with the 400
hope all's well

anthony

combine

3,114 posts

259 months

Saturday 12th December 2009
quotequote all
bow Raw power ! None of the soft lines of ' other ' Tiv's !

pwd95

Original Poster:

8,459 posts

268 months

Saturday 12th December 2009
quotequote all
Hi Anthony, it goes much harder than the 400, it has the large plenum (80mm outside diameter!!)with NCK stamped on it so I think it must have have been built very well from new. Feels noticably stronger than the Chim & Griff from 4k to 6k rpm. Got shocks, springs & bushes coming soon so that should tighten everything up nicely.

How's the Cerb treating you then?

pwd95

Original Poster:

8,459 posts

268 months

Saturday 12th December 2009
quotequote all
combine said:
bow Raw power ! None of the soft lines of ' other ' Tiv's !
Hi Steve, yes, they do take a much better, more aggressive looking photo than the curvy stuff.

combine

3,114 posts

259 months

Saturday 12th December 2009
quotequote all
pwd95 said:
combine said:
bow Raw power ! None of the soft lines of ' other ' Tiv's !
Hi Steve, yes, they do take a much better, more aggressive looking photo than the curvy stuff.
If you're doing run outs at the fest can I get on the list ? Will be doing run outs with this .

Edited by combine on Saturday 12th December 18:54

pwd95

Original Poster:

8,459 posts

268 months

Saturday 12th December 2009
quotequote all
thumbup That's an hour or two sorted then. biggrin

snookes

262 posts

313 months

Sunday 13th December 2009
quotequote all
cerbs going well (at last!) thanks. off the road for six weeks had to have new clutch, slave cylinder and flywheel and the bell housing machined!
i do miss the opentop wind in your hair and the cerbs a bit quiet but it's bloody quick
pwd95 said:
Hi Anthony, it goes much harder than the 400, it has the large plenum (80mm outside diameter!!)with NCK stamped on it so I think it must have have been built very well from new. Feels noticably stronger than the Chim & Griff from 4k to 6k rpm. Got shocks, springs & bushes coming soon so that should tighten everything up nicely.

How's the Cerb treating you then?
;)

HOTTY

669 posts

204 months

Sunday 13th December 2009
quotequote all
hi wynn
nice pic's but it doesn't look like you're commited...........you havn't jack the car up to level the TVR logo on the wheels.....

Really , great pic's ....how do you keep it so clean as you have said it's your daily drive , mines throwing a lot of brake dust as present from the front wheels (mind you it was sitting in somebodys garage for 4 years moving only to be MOT'd.)any advise on a suitable cleaner for the wheels? other than me ask the misses to clean them(no chance).

Also did you get your wheels and tyres (i've still to buy tyres)
cheers
Stephen

BountyHunter

1,050 posts

224 months

Sunday 13th December 2009
quotequote all
very nice wyn smile

pwd95

Original Poster:

8,459 posts

268 months

Monday 14th December 2009
quotequote all
HOTTY said:
hi wynn
nice pic's but it doesn't look like you're commited...........you havn't jack the car up to level the TVR logo on the wheels.....

Really , great pic's ....how do you keep it so clean as you have said it's your daily drive , mines throwing a lot of brake dust as present from the front wheels (mind you it was sitting in somebodys garage for 4 years moving only to be MOT'd.)any advise on a suitable cleaner for the wheels? other than me ask the misses to clean them(no chance).

Also did you get your wheels and tyres (i've still to buy tyres)
cheers
Stephen
That location is only a mile from my house so it's easy to keep clean there. Still looking for 16x9's, don't know when some will turn up, hopefully soon. I've put Yokohamas on the back & they're very good, these.......

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

pwd95

Original Poster:

8,459 posts

268 months

Monday 14th December 2009
quotequote all
snookes said:
cerbs going well (at last!) thanks. off the road for six weeks had to have new clutch, slave cylinder and flywheel and the bell housing machined!
i do miss the opentop wind in your hair and the cerbs a bit quiet but it's bloody quick
My mate took me for a run in his 4.5 RR, Lightweight a few years ago, bloomin bonkers it was, thought I'd travelled through time. wobble Looked at getting one back in the summer but I bottled it in the end. Afraid of the costs TBH. Very happy to be back in a BBW now. yes

pwd95

Original Poster:

8,459 posts

268 months

Monday 14th December 2009
quotequote all
BountyHunter said:
very nice wyn smile
Ta. biggrin

broadside

856 posts

312 months

Tuesday 15th December 2009
quotequote all
Nice 450 Wyn.

Can you tell me what finish that is on the wheel rims? They suit the car, just wondering how durable they will prove to be. I'm looking at options for mine and would like to hear your comments.

Cheers

Nige'

pwd95

Original Poster:

8,459 posts

268 months

Wednesday 16th December 2009
quotequote all
The rims are painted silver. Durable finish but I will be getting them polished after the winter, prefer them shiney. biggrin

Waynester

6,532 posts

280 months

Thursday 17th December 2009
quotequote all
That is a lovely SE Wyn, it reminds me just why i love the Wedges!