Still no oil pressure

[Pilo-Wedgebits]

After changing my oil I had no oil pressure (350). I didnt have chance to try again until today and tried the Adam Quantril method. Refitted pre-filled filter (after denting the thing getting it back off), spun her over and oil pressure light went out. Left it 5 mins whilst pratting about clearing up spilt oil. Re-fitted king lead, spun her over - light stays on now Any ideas why the oil pressure has dissapeared again?

To cap it all she didnt even try to fire. As I said in my previous post on this subject, when I was trying to get pressure up before, I was getting arcing out of the top of the coil with the king lead off - then it stopped. Any ideas on what I have Bed up?

Cheers

Shaun

[convert]

Could be a dodgy filter. I think some of them have a flap in to prevent the oil from draining back.

[Wedg1e]

Sean, you may have popped the ignition amplifier (side of dissy, usually). Or the coil itself may have got fed up of running an open-circuit and burnt out. But you might get lucky and it's just blown the 20A fuse that feeds the ignition coil