Fitting SEAC rear spoiler

[lancia4wd]

Hi,

Have a couple of SEAC rear spoilers and ws planning on fittings them.

My mould have no legs / supports, how do they attach to the boot ?

Regards

Nick

[grahamw48]

Mine has 4 little tubular steel posts going right through to the inner face of the top of the spoiler...looks factory fitted to me.

Edited by grahamw48 on Friday 7th May 00:04

[rev-erend]

They have small glassfibre mouldings .. I'll see if I can take a photo later.

[lancia4wd]

Thanks, mine do not have any mounts moulded to them, i do have the mould so i could do others with something bonded into the fiberglass i guess, but any help is really apprciated.

[rev-erend]

Sorry for the delay - had to install the software on a new PC ..

Front mounting - it's just a sreel tube, bolt is in the boot with a captive type nut in the glassfibre within the spoiler.



Rear mounting - it's a fancy g/fibre moulding but inside in guess what a steel tube.. bolt is in the boot with a captive type nut in the glassfibre within the spoiler.

[Campbell]

rev-erend said:

Sorry for the delay - had to install the software on a new PC ..

Front mounting - it's just a sreel tube, bolt is in the boot with a captive type nut in the glassfibre within the spoiler.



Rear mounting - it's a fancy g/fibre moulding but inside in guess what a steel tube.. bolt is in the boot with a captive type nut in the glassfibre within the spoiler.

Same as min Rev but my rear mounts were cracked and i had a friend make mew new one in resin and mounted on rubber to protect the paint but i want to put more angle into the wing.

Cambelt

[Waynester]

lancia4wd said:

Hi,

Have a couple of SEAC rear spoilers and ws planning on fittings them.

My mould have no legs / supports, how do they attach to the boot ?

Regards

Nick

Both of them..! One on top of the other...bi/plane effect!!

Mine fits the same as Rev's

[lancia4wd]

Thanks for the photos I will see what the bodyshop can do