OZ wheel bolts

[JVaughan]

Does anyone have a source for these ?
Thinking of gettign my wheels polished up and re-lacquered, and would like to replace the wheel bolts ...

[pwd95]

Not cheap, but these are good apparently....

http://www.renowheel.co.uk/

Will be visiting the myself for a quote shortly.

[cuneus]

JVaughan said:

Does anyone have a source for these ?
Thinking of gettign my wheels polished up and re-lacquered, and would like to replace the wheel bolts ...

http://www.titanium-touch.de/titanium_touch_index_...

[gsx600]

I'm looking for the doomed type bolt but can't seem to find them anywhere in a 7mm

[ed_crouch]

M7 Chrome plated bolts are a right tosser to get unfortunately. Most of the pondlife out there will tell you to buy a set of new wheels from them instead. I got mine off eBay.


I also bought my 10 point sockets off titanium touch aka Pertsch and Partner. Would happily do business with them again.

Edited by ed_crouch on Saturday 5th June 15:32

[JVaughan]

Superb ... Need to speak to Renowheel ... tempted to do it myself but will probably cock it up !.

[AM400]

ed_crouch said:

M7 Chrome plated bolts are a right tosser to get unfortunately. Most of the pondlife out there will tell you to buy a set of new wheels from them instead. I got mine off eBay.


I also bought my 10 point sockets off titanium touch aka Pertsch and Partner. Would happily do business with them again.

Edited by ed_crouch on Saturday 5th June 15:32

Can you tell me the length of the bolts? I think they maybe M7 x 24 but cant take one out to check! Also are they threaded the whole length of the bolt or is there a plain shank? Looking to get mine done shortly so I maybe interested in hiring out your sockets if possible.

Thanks, Andy

[gsx600]

I'll pop down tothe shed tomorrow and measure em for you, but I think mine are M7 x 28

[Waynester]

How many bolts are there per wheel...is it 30?

Anyone know the measured gap between each bolt?

[rev-erend]

Phil recently had his wheels refurbished .. details on here:

http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

The picture I was looking for has been removed but the wheel bolts looked
to be an inprovement on the original in that the wheel would be easier to
keep clean.

[gsx600]

30 bolts, 33 mm between bolt centres

M7
30mm total length incl head
21mm bolt length
11mm thread

15mm bolt /nut head width

[Griffer]

Hi there,

I have some brand new spare chrome OZ style bolts which were the nearest equivalent to the original 10 point OZ type I could find for my Griff, I never used these in the end as I got my originals re-chromed. I have enough for 2 wheels only and a couple of spares, about 64 pieces.

M7
Overall length 30mm
Shank 10mm
Thread 13mm
Head diameter 13mm

Note - These are 12 point so an ordinary socket will fit,look very like the original but slightly smaller in head diameter, I also shortened these to 30mm, so will need a dab of paint on the tail end to stop corrosion.

These cost £50.00 from BBS UK, these are from Italy so not Chinese rubbish. If anyone can make use of them they are FOC to a good home, just cover the postage.

Mail me through profile if interested
Steve

Edited by Griffer on Monday 7th June 16:41

Edited by Griffer on Monday 7th June 16:42

[wedgienauld]

Do a search on here. The subject has been done to death. Try this as a starter:-
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Edited by wedgienauld on Monday 7th June 16:32

[gsx600]

Defo interested in the bolts as will at least get 2 wheels bolted back together then

thanks

Paul

[carob]

Can these bolts be bought in black intead of chrome?

Cheers

Rob

[AM400]

gsx600 said:

30 bolts, 33 mm between bolt centres

M7
30mm total length incl head
21mm bolt length
11mm thread

15mm bolt /nut head width

Thanks Paul.

Andy

[Griffer]

Hi Guys,

To those that responded, the spare bolts have now found a new home.

Steve

[Waynester]

gsx600 said:

Defo interested in the bolts as will at least get 2 wheels bolted back together then

thanks

Paul

Did you get them Paul??