Where to purchase new water pump
Discussion
While the engine is out of the car I'd like to replace the water pump just for piece of mind.


The local Landrover parts desk told me this part is now unobtainium.
Nothing wrong with my one but I don't know it's history.
Can anyone tell me if they are still made by any of the handful of manufacturers and do you have a part number for the local factors.
I specifically need this type - or shorter (which I think were fitted on Morgans).
Many thanks.
Phil
420 SEAC
The local Landrover parts desk told me this part is now unobtainium.
Nothing wrong with my one but I don't know it's history.
Can anyone tell me if they are still made by any of the handful of manufacturers and do you have a part number for the local factors.
I specifically need this type - or shorter (which I think were fitted on Morgans).
Many thanks.
Phil
420 SEAC
TVR Power, top lads, they have been getting them made as there are several different types for our engines, all i did was call, send a pic of old water pump, then the new one arrived in post, spot on.
As the others suggested will just as good.
Hows the car coming along Phill
Cant wait to see the beasty afer your treatment, going to be some thing a little sepcial
Cambelt
As the others suggested will just as good.
Hows the car coming along Phill
Cant wait to see the beasty afer your treatment, going to be some thing a little sepcial

Cambelt
Thanks guys.
This morning I noted RPI list these pumps but little pricy
Re car.
2 x rear Brembo handbrake calipers arrived.
Beautiful notched tubing arrived for fabrication of new lower rear wishbones.
Awaiting delivery of full and 'go large' AP discs and calipers for all four corners.
Front hubs should arrive early this coming week.
I think another couple of weeks and new suspension and brakes will be nearly there.
Thanks for all the leads re pump.
BTW, nice engine on ePay but I think a little optimistic in the NP dept:
http://cgi.ebay.co.uk/TVR-4-0-V8-RACE-ENGINE-/2305...
Phil
420 SEAC
This morning I noted RPI list these pumps but little pricy

Re car.
2 x rear Brembo handbrake calipers arrived.
Beautiful notched tubing arrived for fabrication of new lower rear wishbones.
Awaiting delivery of full and 'go large' AP discs and calipers for all four corners.
Front hubs should arrive early this coming week.
I think another couple of weeks and new suspension and brakes will be nearly there.
Thanks for all the leads re pump.
BTW, nice engine on ePay but I think a little optimistic in the NP dept:
http://cgi.ebay.co.uk/TVR-4-0-V8-RACE-ENGINE-/2305...
Phil
420 SEAC
Gassing Station | Wedges | Top of Page | What's New | My Stuff



