Searching for an Automatic-Pedal-Box

[Andreas H]

Hello!

I'm looking for an Automatic-Pedal-Box, and maybe other parts left from an Automatic to Manual Conversion... I've got to go the other way round.

Was the Pedal-Box produced by TVR, or was it taken from a Donor-Car?

Greetings from Germany,
Andreas

[Barkychoc]

Can't you just remove the clutch mechanism from your existing pedal box?
I honestly doubt you will find one.

[matt-man]

Andreas H said:

Hello!

I'm looking for an Automatic-Pedal-Box, and maybe other parts left from an Automatic to Manual Conversion... I've got to go the other way round.

Was the Pedal-Box produced by TVR, or was it taken from a Donor-Car?

Greetings from Germany,
Andreas

green 450 on the classifieds by chance?!

[Wedg1e]

Barkychoc said:

Can't you just remove the clutch mechanism from your existing pedal box?
I honestly doubt you will find one.

Hear hear. The brake and clutch share a common pivot shaft, just whip off the clutch pedal and fit a steel spacer tube instead.

I'm 99% certain the pedal box was a TVR special.

[grahamw48]

I converted a Cortina MK3 from 2 litre manual to 3 litre Auto.

Just chucked the clutch pedal away.

[kevsmev]

Hi Andreas, what car is yours? I converted my 1981 2.8i from auto to manual a few years back. Not sure if the pedal boxes were the same on all cars, but I know the early ones used TR7. I still have most of the bits except the gearbox if yours is Ford based. If you want more info or a photo then PM me.
Kev

[Andreas H]

1984 Model

I've already got the gearbox. Pedal-Box and complete gearshifter-unit are the parts I'm looking for.

What are you asking for the parts?

Posting to germany would be 20 - 30,--GBP

Regards,
Andreas