Good Exhaust Fabricator

[Silent1]

I need a new section of exhaust for the mini, it's a piece that runs from the muffler to the tips and i've procured some John Cooper Works tips so i can now ditch the comedy janspeed ones.

The only problem is i need somewhere good that can knock up a section of stainless steel and fit the tips, whilst also being able to weld a divider down the middle of the pipe, because otherwise it all comes out of one tip and looks cack.

I'm happy with anywhere from london to hunstanton and across to milton keynes

(shame on me for crossposting but i'm desperate)

[cossiefrank]

Someone like Powerflow or Hayward&scott will do custom builds

[markCSC]

+1 for Hayward & Scott http://www.haywardandscott.com/

[cerberatony]

power and performance near norwich do powerflow exhaust tel [phone]

[eccles]

Competition Fabrications are very good at fabricating exhausts (amongst other things!) with a very high standard of workmanship.

http://www.inorfolk.co.uk/profile/463153/Attleboro...

[Chequred Demon]

Strongly reccomend power and performance, Mark is very conscientious and great at one off exhaust fabrication.

[Ferg]

Paul Gooderham nr Clare in Suffolk produces some stunning stuff.

www.paulgooderham.co.uk

[Robert060379]

I make my own. Lazzy bones. ;-)

[Silent1]

Robert060379 said:

I make my own. Lazzy bones. ;-)

Considering it's going to be a PITA with very few off the shelf parts that'll fit the bill (splitting the pipe in 2 with a divider in a straight section for example!)

I'll leave it to someone else, i'll call around some of these today.