Need a custom exhaust place!
Need a custom exhaust place!
Author
Discussion

Max M4X WW

Original Poster:

5,027 posts

211 months

Sunday 21st November 2010
quotequote all
Hi, I live near Hindhead and need a custom exhaust place to remove a silencer from my 540's exhaust.

Anyone know a decent place locally? Looking to have it done this week but don't want the system ruined by powerflow type places as its expensive to replace and no after market alternatives available!

Any ideas?

Thanks

franky dB

243 posts

194 months

Sunday 21st November 2010
quotequote all
Ive got a hack saw in the garage...lol. You not going to get an exhaust valve?

Max M4X WW

Original Poster:

5,027 posts

211 months

Sunday 21st November 2010
quotequote all
This will be quicker to do and cheaper!

wackojacko

8,581 posts

219 months

Sunday 21st November 2010
quotequote all
Certainly would be good to do yourself if not, Simpson Race exhausts are a great company and produce top quality work smile

Max M4X WW

Original Poster:

5,027 posts

211 months

Sunday 21st November 2010
quotequote all
They would probably laugh at what I need doing! Nice systems though.

Id have a system done but I want to keep the standard tailpipe so no point really!

wackojacko

8,581 posts

219 months

Sunday 21st November 2010
quotequote all
Remote key fob Cut out Valves would be the best shout, so you can keep the "sneeking home at 3 in the morning" noise level and Also have an ear splitting roar (when neccesary wink) biggrin

Max M4X WW

Original Poster:

5,027 posts

211 months

Sunday 21st November 2010
quotequote all
Can you get remote fob ones then? I've seen the wired ones but they are £160ish from the US with the bit of pipe included plus the labour to fit.

C2james

4,685 posts

194 months

Sunday 21st November 2010
quotequote all
longlife exhausts might do it for you?

Max M4X WW

Original Poster:

5,027 posts

211 months

Sunday 21st November 2010
quotequote all
Probably but anyone know a decent one?

wackojacko

8,581 posts

219 months

Sunday 21st November 2010
quotequote all
Yes you can get Remote key fob controlled cut out valves I beleive 'chevy-stu' has the remote cut outs on Camaro

Kovac

225 posts

197 months

Monday 22nd November 2010
quotequote all
wackojacko said:
Yes you can get Remote key fob controlled cut out valves I beleive 'chevy-stu' has the remote cut outs on Camaro
I know an Aussie company makes them, the company is called xforce and this the product http://www.xforce.com.au/cars/view_car/29


stevieb

5,253 posts

296 months

Monday 22nd November 2010
quotequote all
Its a bit of a trek, but i had my car done by Hayward & Scott. The local guys were not keen on custom fabrication. Also the guy at simpson race exhausts was not keen on doing custom exhausts for road cars now for some reason.


sebhaque

6,534 posts

210 months

Wednesday 24th November 2010
quotequote all
If you're thinking about the noise control system, I'm getting one put on my VX by Backdraft Motorsport. They're based in Milton Keynes so it's a bit of a travel, but they're pretty competent and can give good discounts.

chevy-stu

5,392 posts

257 months

Wednesday 24th November 2010
quotequote all
I've got 2 electric cutouts on mine, from a company called 'Badlanz' in America...
I have one each side, as it's true dual system for each bank of the V, that are positioned just under where the front seats are. They are operated by a rocker switch I had to fit under the dash, you can get remote key fob ones too, I think Swerni has a Badlanz remote one on his Mustang.. Comes as a complete kit with Y pipe in diameter required, wiring and switch.

I bought mine direct and had it fitted by Longlife in Carshalton, when they made the whole new stainless system up..


Max M4X WW

Original Poster:

5,027 posts

211 months

Wednesday 24th November 2010
quotequote all
Does the floorpan get a bit hot?

Id have to have it next to the backbox really which is quite close to the bumper/fuel tank rolleyes

I'm still wanting to just get one of the rear boxes removed for now, the one which has only one inlet/outlet. Its not a straight through box.

chevy-stu

5,392 posts

257 months

Wednesday 24th November 2010
quotequote all
Max M4X WW said:
Does the floorpan get a bit hot?

Id have to have it next to the backbox really which is quite close to the bumper/fuel tank rolleyes

I'm still wanting to just get one of the rear boxes removed for now, the one which has only one inlet/outlet. Its not a straight through box.
Floor doesn't get hot at all, am planning on getting some downturn outlets fitted, just to leave less black exhaust soot on the underside...

You might find if you wanted to fit one, you'll have to fit it wherever you have space..

sb-1

3,373 posts

292 months

Wednesday 24th November 2010
quotequote all
stevieb said:
Its a bit of a trek, but i had my car done by Hayward & Scott. The local guys were not keen on custom fabrication. Also the guy at simpson race exhausts was not keen on doing custom exhausts for road cars now for some reason.
These guys have a very good reputation.

stevieb

5,253 posts

296 months

Wednesday 24th November 2010
quotequote all
sb-1 said:
stevieb said:
Its a bit of a trek, but i had my car done by Hayward & Scott. The local guys were not keen on custom fabrication. Also the guy at simpson race exhausts was not keen on doing custom exhausts for road cars now for some reason.
These guys have a very good reputation.
Who H&S or Simpson.

Max M4X WW

Original Poster:

5,027 posts

211 months

Wednesday 24th November 2010
quotequote all
I've heard that, Maybe I'll give them a ring.

gingerpaul

2,929 posts

272 months

Wednesday 24th November 2010
quotequote all
Simpsons did the exhausts for my kit car and they did a first class job. I'd highly recommend them. They're likely to be expensive though.