Focus ST Rear Number Plate

[aruck]

Just spend ages getting the plate off as the screws kept spinning. Can't now re-screw the new one on and have tried sticky pads but it fell off. Any ideas? Thanks

[Defcon5]

Better quality sticky pads. Some 3M ones or something

[Justin S]

As shown, the focus has raised dimples to bolt the plate onto.If you use pads, you will need to pack them thick to fit and looks a bit meh......
You may need to replace the rivnut inserts that are knackered by drilling them out and replacing them, I then bolted a plate holder on and stick the number plate onto that.

[Themonk]

I've stuck mine on with sticky pads. I had the same issue. Got thick pads from halfords. It hasn't fallen off yet.

[Max M4X WW]

You can get spacer pads from ebay or just use two normal pads with a bit of plastic between.

Screwing plates on looks naff anyway.

[KingNothing]

My rear plate is just covered in double sided sticky tape, and bent at a curve to fit on.

[iPlod999]

I always use bathroom sealant.

Sticks it hard and if some bugger tries to nick your plates the plastic comes off the back and destroys the letters/numbers.