fiesta mk6 1.3 duratec tps reading high, help needed
fiesta mk6 1.3 duratec tps reading high, help needed
Author
Discussion

tomsjapcars

Original Poster:

9 posts

167 months

Friday 27th July 2012
quotequote all
my tps reading is showing 25% at idle, this seems high to me, ive checked cable and flap is fully closed?? car sometimes hunts at idle and smells of petrol when started from cold, any ideas?

Justin S

3,658 posts

287 months

Friday 27th July 2012
quotequote all
If the TPS is reading out and the flap is closed, it might be damaged and need replacing. There maybe a way to reset it, but I dont know myself. The Lotus way was to turn the ignition on, throttle up and down, ignition off and then start, but is probably linked to diagnostic ports resets on a Ford.

tomsjapcars

Original Poster:

9 posts

167 months

Saturday 28th July 2012
quotequote all
i replaced the tps for a brand new genuine tps and the reading is now 27% instead of 25%, wtf?

Justin S

3,658 posts

287 months

Sunday 29th July 2012
quotequote all
There must be a reset function somewhere on the ecu system. Sounds like there was nothing wrong with the old one. 2% is nothing it you consider it only goes to less than 90 deg from closed to open.Just where you have fitted it. Try under engines section, someone might help you there .