Wallace calculator

[dbv8]

http://www.wallaceracing.com/0-60_equation.php

Apparently you enter your 1/8 mile and speed times and it gives you your 0-60mph.

So i enter 7.595 @ 98.05 and get a result of 2.84

I have recorded a 3.63 at York where they sometimes have a 0-60 camera set up and this is a little optimistic due to the fact that you can get a slight run up to the timing beam. Ie your already moving before the clock starts.

The Wallace calculator results are good for the pub talk though

[Brummmie]

2.43 here

[dbv8]

I thought you might bite at this one Paul.
I reckon you are close to a 3 dead.
Lets face it thats pretty nippy.

[RUSSELLM]

3.81 for my 4.2 Cerb.....

I wish

[Brummmie]

dbv8 said:

I thought you might bite at this one Paul.
I reckon you are close to a 3 dead.
Lets face it thats pretty nippy.

But i'm not bragging...

[APMAUTO]

0.88 for the busa

[Rufus Roughcut]

APMAUTO said:

0.88 for the busa

Puts it in to perspective doesn't it

My bog stock busa i.e. pre turbo time was 1.86 at the pod.

[dbv8]

Rufus Roughcut said:

My bog stock busa i.e. pre turbo time was 1.86 at the pod.

Thats what it takes for me to get to 60 foot!

[slinky]

I used the figures from Redvictor 3's 2nd gear launch on Saturday...

Your 0 to 60 time is: 0.69



We're not even leaning on it yet..

Incrementals are thus :

60' ET	330' ET	594' ET	1/8th ET	1/8th Speed	1000' ET	1000' Speed	Finish Line ET	Finish Line Speed
1.2166	3.1971	4.4772	4.7622	157.93	6.1001	182.89	7.2328	199.80

[Rufus Roughcut]

dbv8 said:

Thats what it takes for me to get to 60 foot!

So we're both captain slows