Griffith 500 non start
Griffith 500 non start
Author
Discussion

stevesmed

Original Poster:

6 posts

148 months

Saturday 21st June 2014
quotequote all
Can anyone help. Non starter this morning ,turning over but no fuel pump . I tested fuel pump all ok , gave pump 12 volts and tried starting but no luck so I'm thinking imobiliser one other strange thing that happened indicator flashing for about 40 seconds with just ignition on. It has a Meta imobiliser. Can I by pass imobiliser.
Thanks steve

V8Bart

788 posts

216 months

Saturday 21st June 2014
quotequote all
disconnect the battery for a min or two? this does a reset on it. You will have tried the special fob under the ign I presume?

Oldred_V8S

3,764 posts

264 months

Saturday 21st June 2014
quotequote all
stevesmed said:
Can anyone help. Non starter this morning ,turning over but no fuel pump . I tested fuel pump all ok , gave pump 12 volts and tried starting but no luck so I'm thinking imobiliser one other strange thing that happened indicator flashing for about 40 seconds with just ignition on. It has a Meta imobiliser. Can I by pass imobiliser.
Thanks steve
ECU relay or Pump relay? The two are interlinked, so the failure of one will stop the other.

Fuel cut-off switch?

stevesmed

Original Poster:

6 posts

148 months

Saturday 21st June 2014
quotequote all
Thanks for help , it was fuel pump rely as suggested , hoping to get a run out tomorrow

EGB

1,774 posts

183 months

Sunday 22nd June 2014
quotequote all
Oldred_V8S said:
ECU relay or Pump relay? The two are interlinked, so the failure of one will stop the other.

Fuel cut-off switch?
Do you mean there are 2 relays for this? Surprise ! The fuel pump relay is in the blue socket. The ignition relay is in the black socket.