Griff rear hood stitching
Discussion
Probably been asked before but....the stitching is starting to come away around the plastic screen in my Griff rear section. Gave it a clean at the weekend I noticed that a small section of the hood had popped out when the rear section was folded down - easily put back - its around about 1/2 inch worth.
Has anybody any experience of fixing this - any people/companies to recommend. Is this a local fix or time to start thinking about a new hood.
Thanks for help
Paul
Has anybody any experience of fixing this - any people/companies to recommend. Is this a local fix or time to start thinking about a new hood.
Thanks for help
Paul
paulmurray said:
Probably been asked before but....the stitching is starting to come away around the plastic screen in my Griff rear section. Gave it a clean at the weekend I noticed that a small section of the hood had popped out when the rear section was folded down - easily put back - its around about 1/2 inch worth.
Has anybody any experience of fixing this - any people/companies to recommend. Is this a local fix or time to start thinking about a new hood.
Thanks for help
Paul
My hood done exactly this a few weeks back, my mum fixed it a treat
I'm not offering her services
but don't rule out DIY or any mates handy with a needle and thread.johnnocosworth said:
need somewhere in midlands to do my rear screen on my chim, preferably cheap and near tamworth
I'm in Atherstone. I see you've just recently joined. You should have come along to the local TVR Car Club meet in Meriden last Sunday! Mail me, and we can meet up some time.
Try a few good camping/tent/caravan awning shops in the yellow pages. Tent and awning windows need stitching as well from time to time and the rapairs will run into pounds not tens or hundreds of pounds.....
One guy reckoned that he would stitch in a whole new plastic window made of thick awning window material for £15 all in!.
All I needed to do was to get the roof off.
MikeB
One guy reckoned that he would stitch in a whole new plastic window made of thick awning window material for £15 all in!.
All I needed to do was to get the roof off.
MikeB
mikeb said:
All I needed to do was to get the roof off.
And therein lies the problem. There is about 4-5 inches of roof material that is is glued down under the header rail (or what ever its called - the bit of the roof that drops down). You'll never get it off without ripping it. I know a few people who've had the rear screen replaced professionaly but they all resulted in having a whole new rear roof section (and then the targa recovered to match of course) becasue the rear section wouldnt come off without ripping.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff




