I'll give £100 to anyone who can guess how I fix my...
Discussion
Do we get a clue, it is more obvious (like puting new bushes into the motor, cleaning the leaves out of the heater-box) or bizarre )like discovering it works as long as the brake pedal is pressed)?
My MGB heater motor works until the heater matrix gets warm. Then it stops are refuses to restart.
S
My MGB heater motor works until the heater matrix gets warm. Then it stops are refuses to restart.
S
Damn, Too late!
.
I had a similar problem. Mine was cured by hitting the dash top directly above the fan switch (as us poor Chim drivers dont get a glovebox). Unfortunatley hitting a pothole had the same effect. The cause was a loose wire in the connector block linking the fan control circuit board to the switch.
. I had a similar problem. Mine was cured by hitting the dash top directly above the fan switch (as us poor Chim drivers dont get a glovebox). Unfortunatley hitting a pothole had the same effect. The cause was a loose wire in the connector block linking the fan control circuit board to the switch.
phlap said:
Damn, Too late! .
I had a similar problem. Mine was cured by hitting the dash top directly above the fan switch (as us poor Chim drivers dont get a glovebox). Unfortunatley hitting a pothole had the same effect. The cause was a loose wire in the connector block linking the fan control circuit board to the switch.
Close enough for me. Pay the man srebbe

NJW 77 said:
phlap said:
Damn, Too late! .
I had a similar problem. Mine was cured by hitting the dash top directly above the fan switch (as us poor Chim drivers dont get a glovebox). Unfortunatley hitting a pothole had the same effect. The cause was a loose wire in the connector block linking the fan control circuit board to the switch.
Close enough for me. Pay the man srebbe
I will not pay him on two counts:
1) He's two days too late!
2) Even then (after he was told the answer) he still got it wrong! Hitting the dash above the fan switch was, of course, the first thing I tried. The 'opening and shutting the glove box' solution was discovered by my 13 yr old daughter. She's well pleased with herself. Me, I'm just very confused!

Seasider said:
srebbe64 said:
The 'opening and shutting the glove box' solution was discovered by my 13 yr old daughter. She's well pleased with herself. Me, I'm just very confused!
So have you given her the £100 ????????
Good call!
C'mon srebbe, dont be a tight arse. Give your girl the money...and we want proof of said payment

S'funny coz I had a VERY similar prob ont' Cerb. I took the Passenger's-side cover off and found the Heater and Wiper control boxes hanging by their respective cables !
After fiddling a bit the blower now works no probs.
Unfortunately, I now have one of those infamous ribbon cables hanging around not plugged into any component !
Anyone have any idea exactly where it goes ?
(Yes, I know I can expect some of the most rude and biologically impossible answers)
>> Edited by Mr.Cerbera on Monday 27th February 16:18
After fiddling a bit the blower now works no probs.
Unfortunately, I now have one of those infamous ribbon cables hanging around not plugged into any component !
Anyone have any idea exactly where it goes ?
(Yes, I know I can expect some of the most rude and biologically impossible answers)
>> Edited by Mr.Cerbera on Monday 27th February 16:18
NJW 77 said:
Seasider said:
srebbe64 said:
The 'opening and shutting the glove box' solution was discovered by my 13 yr old daughter. She's well pleased with herself. Me, I'm just very confused!
So have you given her the £100 ????????
Good call!
C'mon srebbe, dont be a tight arse. Give your girl the money...and we want proof of said payment
Yeah fair enough, I'll do it!

Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff




